Question about 2007 GMC Yukon Denali

1 Answer

Program the garage door opener the Built-in car remote

Hi Gentlemen
I have Yukon 2007 and I want to program the garage door opener to the Built-in car remote
control. What is the easiest way to program?
Your assistance is highly appreciated

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Contributor
  • 504 Answers

GOTO HOMELINK.COM

THEY MAKE THE SYSTEM AND HAVE INSTRUCTIONS YOU CAN DOWNLOAD.

PLEASE NOTE: NOT ALL BRANDS/MODELS OF OPENER WILL WORK WITH THIS SYSTEM.

HOPE THIS HELPS

Posted on May 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I program my garage remote in my 2003 es300 Lexus?


You probably need to program the garage door opener,not the car.I have only had to program the Craftsman opener in my garage once(our 2005 Grand Caravan has a built in opener)The opener should have a programming button(my Craftsman opener's button is under one of the light covers).It will probably have the programming instructions near the button(in TINY print).You will want to have ALL of your garage remotes handy(to make sure they all still work after adding the car's remote-some openers have a maximum number of transmitters allowed.

May 28, 2012 | 2003 Lexus ES 300

1 Answer

How to program a garage door opener in a 2007 Acadia


Grab the remote for the garage door you want to program, then pick a button you want to match the door, next is turn key on push button on the truck and then button on the remote, hold both buttons until flashing red light turns green. you can do this with each button and each remote.

Mar 02, 2012 | 2007 GMC Acadia SLE

1 Answer

NEED TO REPROGRAM MY GRARAGE DOOR OPENER IN2001 YUKON


on the back of the garage door opener itself you will see a small program button -- push this button and the little light should start to blink,,, while the light is flashing, go to your vehicle and push the garage door opening button,, this should program the system to know your vehicles signal.

c...

Feb 03, 2011 | 2001 GMC Yukon XL

1 Answer

Programming garage door openers for 2007 Yukon Denali


Press and hold the two outer buttons on the homelink system in the car until the led flashes rapidly or goes out. Then hold the programmed remote up to the homelink system and at the same time press the button on the remote and the button on the homelink until the led light blinks rapidly or goes out. It should take less than 30 seconds. ----- Then go to the motor head and press the colored learn button on the motor head and go back to the home link and press the homelink button 3 times to activate. If your opener has dip switches stop at -----. Thanks BB

Sep 17, 2010 | 2007 GMC Yukon Denali

1 Answer

Cannot program garage door transmitter


Depending on the type of vehicle home remote system you have and the type of garage door opener installed will determine how you program the system in your vehicle.
Below is a web address for the owners manual to your Buick. It will show you step by step how to set your Buick's remote system to open your garage door.
Good luck.
Regards,
http://www.extendedgmwarranty.com/owners-manual/buick/2007-Buick-Rendezvous.pdf

Sep 08, 2009 | 2007 Buick Rendezvous CXL SUV

1 Answer

Just moved, no garage remote, need to set the opener in my SUV.


The garage door opener is needed to use the HomeLink system that is in your vehicle. This design is so that no one can program theirs to gain access to your garage. You will have to obtain a working remote and it will have to be programmed at the garage door.

Jul 13, 2009 | 2004 Nissan Maxima

1 Answer

How do i program the homelink for my garage door opener on my 2002 gmc yukon, i don't have a manuel?


you push in the learn button on the garage door opener and then you hold in the button in your car for a few seconds and then that should program it. It works just like programming a regular remote

Jun 12, 2009 | 2001 GMC Yukon

1 Answer

In following the Chevrolet Tahoe instruction to program a garage door opener, I am having problems with the system working. The codes are the rolling key type.


Press the outer 2 buttons untill the bink rate changes then release.

Press the button you want to train at the same time you hold down an unused button on one of your factory GDO remotes, hold untill flash rate changes.

Press learn button on GDO, press the button you just programmed in the Tahoe, should be programmed.

(Info should be in users manual under HomeLink.)

May 28, 2009 | 2007 GMC Yukon Denali

1 Answer

Can't program my garage door opener


go to the link below (GM web site for owners) and then select your year and model, U will need a Yahoo mail account to sign in.

May 21, 2009 | 2007 GMC Yukon Denali

4 Answers

Program garage door opener


You must first erase what's in the memory.
1.) Simultaneously press both buttons 1 and 3 on the Audi's built-in remote. Hold them until the indicator light flashes (20 seconds or longer).
2.) Now hold your garage door remote close to the Audi remote.
3.) Simultaneously press and hold both your garage door remote button and the button you would like programmed. The indicator light will first flash slowly then rapidly.
4.) You may release both buttons once the light flashes rapidly.

Jul 01, 2008 | 2000 Audi A6

Not finding what you are looking for?
2007 GMC Yukon Denali Logo

1,407 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...