Question about 2008 Chevrolet Express

1 Answer

Does 2009 chevy.express have connection for electric brake?

I just purchased a 2009 chevy express.my camper trailer has electric brakes.
i'm not sure if the harness is compatable.do i have to hook up an adapter under the dash.any info would help.

Thank you!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,902 Answers

Yes you will have to hook up a adapter. The only reason that you would not have to do this is if your vehicle came with the complete tow package, meaning shocks and tighter springs and everything else. But most of these models require a adapter to run electric brakes

Posted on Feb 21, 2009

1 Suggested Answer

motor1258
  • 6674 Answers

SOURCE: 2009 chevy expres trailer wiring harness

Ask dealer if it has a towing package on it. If it does, you usually just pop fuse in under hood for electric brakes, and harness to adapt into is usually near or at rear bumper. Even if it doesn't have brake wire, you should still be able to install adapter at rear,for lights etc. which is available from dealer or auto supply places, then you may have to run electric brakes separate.

Posted on Feb 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Utility trailer electric brake are not working when connected to my truck


the wires to the electric brakes at wheels , I had this problem on my travel trailer and it turned out due to corrosion at connectors at wheels the power wasn't getting to wheels one other thing to ck is trailer plug , it turns out not all mfg wire there plugs the same , try to obtain a diagram from mfg for both trailer and truck , compare them for any differences

Sep 29, 2016 | Cars & Trucks

1 Answer

I have a black an orange wire by the brake cylener not sure where it goes


This is for trailer brakes, nothing to do with the car itself, only if you pull a heavy trailer that requires brakes, like a larger camper.

Dec 04, 2013 | Ford Cars & Trucks

1 Answer

How should I prepare my durango to pull a 24 foot travel trailer...what class of hitch, do I need in-board electric trailer brake controls, etc.?


Hi Frank,
I have a Durango 2000 and pull a 24 foot ski boot loaded with equipment. I don't know about you, but I wouldn't try towing anything without the trailer brakes connected. I purchased the Titan Trailer brakes setup and they've never failed me once. The hitch: just make sure you get the right towing capacity for your travel trailer. I have the 5.9 liter engine, which allows up to 6500 pounds of towing capacity. Your owners guide will explain how many based on engine size.
Good Luck, and happy traveling.
Mark

May 11, 2012 | 2001 Dodge Durango

1 Answer

1999 Silverado 1500: does my chevy 99 1500 come with trailer brakes...


if its set up for trailers with brakes, it should have small black box under the dash above the pedals; if there is one you can adjust the brake timing to syncronize the trailers brakes with the trucks; if there is not one you can purchase one and mount it and run a few wires

May 17, 2010 | 1999 Chevrolet Silverado 1500

2 Answers

Wiring towbar for t25 volkswagen


Hi Paul,

This should help,

Plug Types/Application

7 Way - RV Trailers, Horse and Utility Trailers
6 Way - Horse, Stock and Utility
4 Way - Utility Trailers

Columns are Color, Function, Mark on the plug.

Seven wire Trailer plugs
:

Horse, stock or utility trailers:
White = Ground - 1
Blue = Electric Brakes - 2
Brown = Tail and clearance lights - 3
Black = Battery, aux power - 4
Yellow = Left turn/Brake - 5
Green = Right turn Brake - 6
Orange or Purple (not both) = Auxilliary or Reverse - 7

Recreational Vehicle:
White = Ground - 1
Blue = Electric Brakes - 2
Green = Tail and clearance lights - 3
Black = Battery, aux power - 4
Red = Left turn/Brake - 5
Brown = Right turn Brake - 6
Yellow = Auxilliary or Reverse - 7


Six wire trailer plugs:

Horse, stock or utility trailers:
White = Ground - GD
Yellow = Left turn/Brake -LT
Green = Right turn Brake -RT
Brown = Tail and clearance lights - TM
Red or Black (not both) = Battery, aux power - A
Blue = Electric Brakes - S

Recreational Vehicle: (color, use, plug mark)
White = Ground - GD
Brown = Right turn Brake - RT
Green = Tail and clearance lights -TM
Black = Battery, aux power - A
Red = Left turn/Brake - LT
Blue = Electric Brakes - S


Four wire plugs:
White = Ground
Yellow = Left turn/Brake
Green = Right turn Brake
Brown = Tail and clearance lights


Ground should be 10ga.
Others 14 ga

Best regards
Mike

Sep 15, 2009 | 1986 Volkswagen Wagon Camper

1 Answer

Need a diagram or instructions to install a electric brake system


http://www.hayesbc.com/PDFs/SYNCRONIZER%20Installation%20and%20Operation%20Manual.pdf


Click on this site. This is the manual for you brake system. Looks like it might have the plug info in it also


Hope this helps

Aug 08, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

2001 Dodge Dakota Trailer Brake Wiring


Call dealer & ask them to run your vin# to see if it came with towing package. They shouldn't mind. If not, you'll have to wire it in yourself.

Jun 05, 2009 | 2001 Dodge Dakota

1 Answer

How to wire in trailer lights.


there are kits available at auto parts stores that plug into existing brake lights. Some kits have modules that are necessary for proper signal to trailer lights.

Apr 23, 2009 | 2009 Chevrolet Express

1 Answer

Brake controller not communicating w/ 7 pin connector


what type controller did you install? Is this a camper or trailer? Is the controller hydraulic plumbed into master cylyder? Important to know how to adjust rheostat for sensitivity. If set at minimum the system is basically on the edge of not sending any signal to towed unit. The intructions should explain how to make this adjustment. If set too sensitive trailer brakes will lock up before the tow vehcle starts to brake. Controller should be set so trailer starts braking just befor the tow vehcle. If not the trailer will tax the tow vehicle brakes by pushing. Its set right when you feel the combination stretching out. trailer first then tow vehcle. Good luck and remember, if truck brakes first and too hard you risk a jacknife. All light voltages should be system voltage. Brake voltage is variable depending on setting on controller. Understand your breakaway brakes and how they work. breakaway breaks require an auxillary battery. Again, good luck and you know where to find me if I can be of anymore help.

Apr 13, 2009 | 2003 Chevrolet Silverado 2500HD

1 Answer

2009 chevy expres trailer wiring harness


Ask dealer if it has a towing package on it. If it does, you usually just pop fuse in under hood for electric brakes, and harness to adapt into is usually near or at rear bumper. Even if it doesn't have brake wire, you should still be able to install adapter at rear,for lights etc. which is available from dealer or auto supply places, then you may have to run electric brakes separate.

Feb 21, 2009 | 2008 Chevrolet Express

Not finding what you are looking for?
Cars & Trucks Logo

247 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...