Question about 2000 GMC Sierra

1 Answer

2002 gmc, distributercap and rotor foul out every 10-12 months.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 462 Answers

THERE IS A RECALL FOR THIS PROBLEM. CONTACT YOU DEALERSHIP TO FIND OUT IF YOUR TRUCK IS INVOLVED.

Posted on May 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Are 2002 GMC Envoy brake rotors turnable or just a one time use?


They are pretty thin when new, and most of the time cannot be turned. If they have any signs of wear I replace them. Hope this helps.


Please take a moment and rate my answers....... Thanks

Dec 01, 2010 | 2002 GMC Envoy

1 Answer

How to take front rotor off of 2004 gmc sierra . I have caliper and rotor bracket off but still is tight.


if the caliper and bracket are off and all you have is your rotor get a sledge hammer and hit in between the bolts coming through the rotor, while you give it a smack turn the rotor and hit a different spot in between the lugs. also try spraying penetrating blaster this can help free it up. good luck

Apr 16, 2010 | 2002 GMC Sierra

2 Answers

Replace front left wheel berring on 2002 GMC Yukon


do not replace only the bearing. replace hub assembly. remove rim/tire , remove caliper, mounting plate, rotor. . un bolt hub assembly, unplug abs. remove front axle nut if 4x4. you may need to rent the axle nut remove kit and hub puller. pull out hub. drive axle reward out of hub. install new part. do not torque hub over 90lbs. check with parts sell for spec

Jan 03, 2010 | 2002 GMC Yukon XL

1 Answer

How to install brake rotors on a 02 gmc sierra ?


Remove the tires. Then the calipers.Two bolts from the back side.They are allen I think.Well the used to be anyway.Once you have them off rotor should just fall off.

Nov 08, 2009 | 2002 GMC Sierra 1500

2 Answers

How to remove the rear rotors on a gmc 2002 2500 hd extra cab 4x4


The rotors are one with the hub.s, So, you need to pull the axles , hub bearings. Good Luck

Sep 18, 2009 | 2002 GMC Sierra 2500HD

1 Answer

Anti lock activating at low speeds on dry pavement 2002 gmc Z71


you need someone to scan it for codes but it sounds like the speed sensor for one of the wheels is droping the signal to the abs unit at lower speeds they can see that with the data stream with a scanner

Jul 20, 2009 | 2002 GMC Sierra

1 Answer

2002 GMC Denali`


If the rotor surface is smooth, then NO, you do not have to turn them.
If the rotor surface looks like someone has ran a heavy chisel around them, then YES.
I have found that a lot of auto parts and repair shops are not turning rotors or drums anymore because the cost of replacing them with a NEW part, in some circumstances, is not that much more money.
Do Yourself a favor and check out the price or a set of NEW rotors & pads at an auto parts store.

Personally, I rarely go to a dealership to get parts. I have found that most of the parts from a good auto parts store are just as good and sometimes better & cheaper than a dealer...
BUT! that is my opinion.

Nov 24, 2008 | 2002 GMC Yukon Denali

Not finding what you are looking for?
2000 GMC Sierra Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...