Question about 2001 Chevrolet Camaro

1 Answer

Help locating the Ignition Switch on a 2001 Camaro PLEASE!

Can someone please help me to locate the Ignition Switch in a 2001 Camaro? If there is a site you could direct me to or specific instructions you could provide it would be greatly appreciated!

Posted by on

  • 1 more comment 
  • nicolelida Feb 21, 2009

    I have already purchased the part but cannot find where it is located in the vehicle to perform the replacement. This is the part I already have:
    http://www.carpartswholesale.com/images/...



  • nicolelida Feb 21, 2009

    Many thanks! Will go back out and look.

  • Mike Butler
    Mike Butler May 11, 2010

    Locate one to buy, you mean? The tumbler in steering wheel, or switch on column below?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 1,000 Answers

It should be located on the right side of the steering column about half way to the floor. It is activated by a rod connected to the lock key cylinder that runs down the column to the switch.
Let me know if you need anything further.
Good luck.
Regards,
Help locating the Ignition Switch on a 2001 Camaro - 327dcf1.gif

Posted on Feb 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do you locate and change an ignition control module on a 1994 Camaro?


1994 Chevrolet Camaro 3.4L SFI 6cyl

The Control Module-Ignition is located: Under hood, center, front engine area, below valve cover, mounted in distributorless ignition assembly

1994 Chevrolet Camaro 5.7L SFI OHV 8cyl

The Control Module-Ignition is located: Under hood, center, rear engine area, mounted in distributor

Jul 18, 2015 | Cars & Trucks

1 Answer

Chevy camaro ignition I changed the relay


sound like ignition switch and keylock cylinder broken.

Oct 06, 2013 | Cars & Trucks

2 Answers

I have 87 camaro. Has no power to inside of car. New battery and altanater. Help please


When you fitted the altenrator have you left a wire off the positive battery terminal by any chance as it sounds like this is the problem ,you have forgotten to put all the wires back on the terminal

Feb 14, 2012 | 1987 Chevrolet Camaro

1 Answer

CAN'T FIND THE ORFICE TUBE ON MY 2001 CAMARO


Hello chericegodea: My name is Rpger and I will help you. The orfice tube is located in the liquid len at the evaporater coce. This will be the small diametor linn at the firewall. Seperate the fittings at the firewall and look inside the tube that comes through the firewall. The object you see will be the orfice tube. Make sure the A/C has been recoverd or that the system has no pressure as there could be a dangerousexscape og freon and gas. Should you need further help please just ask. Please rate the answer. Thank You for using FixYa. Roger

Jun 28, 2011 | 2001 Chevrolet Camaro

1 Answer

Diagram for 97 camaro ignition switch


Hello,
my 97 LT1 chevy camaro is giving me ignition problems.
I changed the relay box and now cannot turn the key. It's like there is no thread. ?.. someone please help

Sep 09, 2010 | Chevrolet Camaro Cars & Trucks

1 Answer

Headlights do not work on 96 camaro.


by looking at the manual for my 97 Camaro and if you say that the switch is good then that helps narrow it down a lot, because i found a circuit breaker... not a fuse!...located inside the headlamp switch itself. good luck and let me know if you find it... c.b's. are usually resetable please let me know if you fix it because i have the same car and it might go out on me someday..thanks man! also you can see if your getting voltage on the yellow wire when the switch is in the "head" position..if its not there, then its almost a guaranty that its the c.b.

Apr 26, 2010 | 1998 Chevrolet Camaro

1 Answer

Replace ignition in 1999 camaro


The steering wheel does have to come off to access the ignition lock cylinder, however the ignition switch is mounted to the column and does not require the wheel to be removed. A locksmith would have rekeyed the lock cylinder. The high beam switch is mounted of the left side of the column and is actuated by a 6 inch long rod. This does not require the wheel to come off.

Feb 24, 2010 | 1999 Chevrolet Camaro

1 Answer

I need help locating the fuel pump relay switch


pop the hood look for a black box.should be in their

May 21, 2009 | 1995 Chevrolet Camaro

2 Answers

My 95 chevy camaro starting issue


sounds like its the ignition switch.the grinding noise you hear is probably the starter still engaged. thanks jeff

Nov 30, 2008 | 1995 Chevrolet Camaro

Not finding what you are looking for?
2001 Chevrolet Camaro Logo

Related Topics:

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...