Question about 2002 Isuzu Trooper

1 Answer

Isuzu trooper 2002 RLV engine. camshaft timing

Isuzu trooper 2002 RLV engine.
i was confused on what timing mark should i use in setting the camshaft timing. there are 2 different timing marks in each 4 camshafts. 1 punch mark and 2 punch mark.

Posted by on

  • Anonymous Mar 13, 2014

    set camshaft timing 1995 Jaguar 4.0L I6 engine

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Isuzu Master
  • 1,757 Answers

Sorry for the severe delay.
I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but I am going to answer it in case you still do.

Click on the following direct Link. It has the Timing Belt Diagrams and Photos with Marks for the Camshaft and Crankshaft that you will need. It also has numerous other helpful diagrams, instructions and photo's for use.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/2002/make/isuzu/model/trooper/2002_isuzu_trooper_timing_belt_diagram_marks.htm

Posted on Mar 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to set timing for RLV engine Isuzu wizard?


wizard? what year.
not sold here, we are a USA forum, not japan , nor Thailand.
sold 1989 to 2004 , world wide, and under diffr, names
wiz, is Japan marketed name.
so where are you and what engine.
RLV ?

ok, the internal code RLV is.

6VD1W DOHC 3.2-Liter V6 Engine (RLV)

the 1w means the twin cam version 3.2L
so what do you want to time the 4 cams
just the belt or the cam gears , or what.
if you search this forum the 6vd1w , this has been answered many times. just search, see the photos
or tell how far engine is taken apart,
heads off
heads dismantled, what?

Jun 27, 2016 | Isuzu Cars & Trucks

1 Answer

Isuzu 320 KB v6 camshaft timing diagram


Here is a diagram, I just want to make sure we have the correct information or engine damage will occur. double check these specs. 1999 ISUZU TROOPER V-6 WITH A 3.2 OR 3.5 ENGINE.

Here are two diagrams to line up camshafts and crankshaft. hope this is helpful. good day.3_2_2012_9_19_49_pm.gif3_2_2012_9_20_21_pm.gif

Mar 02, 2012 | 1999 Isuzu Trooper

1 Answer

2002 Isuzu trooper 3.5 engine at 2 wd, I am reinstalling heads and need torque and sequence and timing info


here you go cylinder head 47 ft lbs, rocker cover 80 in lbs, camshaft caps 89 in lbs, intake 18 ft lbs.


10_8_2011_9_35_54_pm.jpg
10_8_2011_9_36_15_pm.jpg10_8_2011_9_36_43_pm.jpg

Oct 08, 2011 | 2002 Isuzu Trooper

1 Answer

4jx1 camshaft marks on isuzu trooper 2001 3,0 dohc engine


the timming gear that the belt runs on has a mark (V cut in gear) to rear cover at about 12 o clock and crank pulley has timming mark for top dead centre, both cams have cut outs in rear that a special tool (camshaft stopper 5-8840-2592-0) locks into to hold cams in correct position, but can do without this, if the cam belt gear is off, the keyway should be at 12 o clock. the marks in the camshaft gears (dots) is for assembly of sissor gears to solid gears on camshafts that run together and they should match up only if you had this appart.

stevenhurc_12.jpg no.1 is timming mark

stevenhurc_13.jpgthis is the locking plate tool

Apr 19, 2011 | 2001 Isuzu Trooper

1 Answer

I have isuzu trooper 1988 am changing the timing belt but i forget mark the timing and now i cant get it start.


Take it to a trained mechanic that works on isuzu's. If you have never put a belt on one of these do not attempt it.The cam pulley turns aver three times to one rotation of the camshafts, no marks.

Oct 23, 2010 | 1988 Isuzu Trooper 2 Door

2 Answers

Where is the timing marks in isuzu trooper1995?


the timing marks are on the top (camshaft)and bottom (crankshaft)pulleys,but you may have to clean off the faces to see them,try using chalk.

Apr 18, 2010 | 1995 Isuzu Trooper

2 Answers

Timing mark's on isuzu trooper 3.0 td . changed head gasket now engine turn's over as if no compression .


The cam pulley notch goes in line with the mark on the front cam bearing cap and the crankshaft pulley goes at 12 o'clock - its got a tiny mark on the back lip that lines up with the mark on the cover .

Did you take the cams off in one lump or split them ? if you did come back on here for how to time them up .

Feb 20, 2010 | 2002 Isuzu Trooper

1 Answer

2002 isuzu trooper want pull hat off your head timing belt marks are on mark. the motor will crank but do not have enough power to pull off. it is a 3.5 v-6 and computer code shows p1120 and p1334.


Aah I see. Let's start from the beginning then. Standing in front of the car and starting from YOUR left , looking at the cams you should see RE, RI, LI, LE on each of the camshafts.(R for right bank, L for left bank, I for intake and E for exhaust) Right bank camshafts are marked with one dot, left bank with 2 dots on the shaft itself. To align the camshafts to each other each cam shaft gear has a mark on it. Draw an imaginary line between the centre of the camshaft and the centre of the pulley. The alignment mark should be between the two along this imaginary line. The result will be that RI an RE will be at the top of each gear. The same with the left bank. Also read this: http://www.fixya.com/cars/t3609098-nned_know_set_cam_engine_timing
It explains setting the timing further. Get these set up correctly and then we can dig further. I can post a diagram but haven't figured out how on Fixya yet.

Dec 10, 2009 | 2002 Isuzu Trooper

2 Answers

2000 isuzu trooper 3.2 v-6 dohc camshaft timing marks pulled camshafts to do valve job and need to align marks on drive gear and cams


It's more to it than aligning the marks since the cam pulleys turn about three times or more to one turn of the camshaft on this engine. You need to find someone that is experienced on this vehicle.

May 12, 2009 | 2000 Isuzu Trooper

2 Answers

Crancshaft pullt jamming up


You must have #1 on TDC and the camshafts on the timing mark to fit a new belt , I rekon yer valves are fouling the piston .
Ignore the mark on the pump pulley .

Nov 25, 2008 | 1998 Isuzu Trooper

Not finding what you are looking for?
2002 Isuzu Trooper Logo

1,624 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...