- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Start with having the heater core flushed and also make sure the valve that allows coolant to flow through the heater core is opening and closing correctly when switching from heat to A/C. Please rate this answer, thanks.
Most of these cable that break usually break at the connector under the dash. If this is the case you can still open the hood just find where the cable connects and pull this it should open the hood.
the best thing for you to do is stop by your local Dodge dealership in the parts department and they be able to print you off the pictures and diagrams you need if all fails stop by your local library and get your hands on a Haynes auto repair manual for your van wish you the best of luck Michigan Man.
your on the right track. it can't be done with out a spring compressor. but do you purchase a GOOD
SAFE compressor for a few uses ?. better to unbolt the three top 13 mm retainer nuts ,than unbolt the two 21 mm lower steering knuckle bolts along with the 15mm stabilizer nuts, and take the strut to a local garage and pay a couple of bucks and have someone pressthe spring on thier compressor for you . its safer. also index the lower 21 mm knuckle bolts for reassemble. its your wheel alingment camber angles.
good luck chris
what is the cause of my lighter not working?
×