To lift my engine or the front end of my car
IF THIS WILL BE A JACK YOU USE OFTEN I WOULD GO FOR A 2 1/2 OR 3 TON.THE LARGER JACK WILL GIVE YOU MORE LIFT . YOU DO NOT WANT TO OVERLOAD A JACK AND ALWAYS USE JACKSTANDS
Any roll away floor jack from a autoparts store will be fine and strong enough
SOURCE: Replace oil pump on 92 4cyl toyota camry
Hi, take the oil filler cap of and start the engine,you should see oil spraying out the filler port ,that indicates that the pump is working properly, good luck.....
SOURCE: 1993 Toyota Camry V6 Timing Settings
Get a T belt from toyota. It has 3 white lines on
it and and arrow mark. 2 lines are solid and one is broken. Put the
arrow facing away from the engine. The cam gears have a dot punched
into them near a certain tooth. This is where the solid white lines
will line up with. The crank gear will have a dot also. It will line up
at 90 degrees from the top, towards the front of the car. This is where
the broken line will match up with. With the belt installed with all
lines on their proper dots and arrow away from the engine, you valve
timming is correct.
Of course you need to remove and compress the tensioner also. I assume you know this already since you didn't ask.
SOURCE: Need instructios to repair 1997 Toyota Camry Broken Exterior Door Handle
Two 10mm bolts, or nuts, hold the handle on from inside the door. dont forget to remove actuating rod from old handle. probably clip is broke also.
SOURCE: HOW TO SET TIMING ON 96 TOYOTA CAMRY 2200 MOTOR
Click on the following free direct Link. It has the Timing: Pulley, Belt and Mark Diagrams for your 1996 Toyota Camry. Plus additional Instructional and Directional Diagrams.
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
http://www.2carpros.com/car_repair_information/year/1996/make/toyota/model/camry/1996_toyota_camry_timing_belt_diagram_marks.htm
400 views
Usually answered in minutes!
×