Question about 1999 Chevrolet Malibu
Chevy malibu 1999
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
Posted on Aug 14, 2009
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Rear door panel on 1999 ML320
first hing you need to take screws out look for little covers then by the handle may have screw there and under armrest/ pull the bottom of the door trim out and slowly around the door then pull up and out then you can get into the door shel there is a vapor barrier/ Go from there Please rate my response Thank you very much
Posted on Jan 30, 2009
SOURCE: drivers door panel removal
The book says 1. remove power accesory switch panel by using suitable flat blade tool at front. 2. Disconnet electrical connections.
3. pry door handle plug by using small flat bladed tool
4.remove door trim handle mounting screws
5. remove door trim panel from retainers.Start at rear bottom corner and pry outward.
6. remove door panel.
KD does make a tool that will properly pry the door panel away from reainers. KD 3705 You might get by with a screwdriver.
One other thing you may need to have the window down to get the panel to come off. You will have to lift up on it once it is loose from the fastners.
Hope this helps you out.
Posted on Mar 24, 2009
SOURCE: I need to take the
I had this problem you can just pop it off and it will snap back on. It was the window motor and I went to a junk yard and only paid $35.00 for the part compared to $500.00 the dealer wanted.
Posted on Jul 08, 2009
usually two screws one at the armrest and one under the power window console , this console usually pops out to let you at the screw.
Posted on Oct 27, 2009
Tips for a great answer:
Nov 12, 2016 | Cars & Trucks
Dec 10, 2014 | 1999 Chevrolet Malibu
Jun 24, 2011 | 1999 Chevrolet Malibu
Jun 18, 2010 | 1999 Chevrolet Malibu
Jan 21, 2010 | 1999 Chevrolet Malibu
Mar 23, 2009 | 2003 Chevrolet Malibu
Mar 12, 2009 | 2000 Chevrolet Malibu
Jul 23, 2008 | 1999 Chevrolet Malibu
Jul 06, 2008 | 2003 Chevrolet Malibu
564 people viewed this question
Usually answered in minutes!