Question about 1999 Chevrolet Cavalier

1 Answer

Have 1999 chevy cavalier and will not start no spark new ing modular crank sensor cam sensor and still will not start

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

I have a 2002 cavalier that had cam crank ignition control mod and coil packs replaced still didnt start so i started in the steering column it turned out to be the acc switch harness one zip tie around switch and harness problem solved

Posted on Jun 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No start no fuel or spark


What about your ignition module? I can't tell if you just replaced coils or ignition module included? Also, before buying anything, check voltage and ground for ignition module. Pink wire is voltage, black wire is ground.

The crank sensor sends ac signal to ignition module, the module converts signal to dc, something the computer can handle, then sends rpm signal to computer.

Dec 16, 2015 | 1999 Chevrolet Cavalier

1 Answer

I have a 91 chevy corsica no spark on crank replaced coils wires and plugs still no spark brian


run the fault codes and check for cam/crank sensors. check operation of immobiliser. check fob key battery
check for ING fuse or fusible link near battery

Feb 14, 2015 | 1991 Chevrolet Corsica

2 Answers

Went to see wat was wrong with my 1999 chevy cavaliar they diagnoised it with the proble of having a crank and camshaft postion sensor problem started right up for a day then stauled out and wouldnt start...


thats corret replace crank postion sensor and cam postion senosr as they both cause hard start and no start situations the cam sensor is very easy to change crank sensor needs to have harmonic balancer pulluy removed and then remove sensor and reinstall new sensor easy but you need a removal tool and install tool for that pully can be rented at autozone its free its just a depostit i hope it helps


please 4 thumbs allows me to continue to help you

May 13, 2011 | 1999 Chevrolet Cavalier

1 Answer

I am not getting any spark. Replaced the Crank Position Sensor and the ignition module. What else could be causing it? It is a 2002 Chevy Cavalier with the 2.2 OHV motor.


I would say it may be the cam sensor. Test the wires to the sensor while cranking and see if it is getting power. You can always try unpluging it and cranking. It may start for you. It could also be your ecm. The computer controls all of your ignitions.

Feb 25, 2011 | 2002 Chevrolet Cavalier Coupe

2 Answers

My 02 chevy cavalier turns over but will not start. I have replaced ever thing i know that could be wrong.


does it produce fire does the gas pressure rise does the crank sensor and cam sensor work

Feb 09, 2011 | Chevrolet Cavalier Cars & Trucks

4 Answers

There is no spark thus car won't start. the battery is fine, it turns over good, it is not flooded, the spark plugs are new, the ignition coil was just replaced, what else controls the spark


The Crankshaft Position Sensor and the Ignition Control Module also control the spark. It depends on whether your vehicle is equipped with the 2.2L engine or the 2.4L engine as to where these components are located and what they look like.

Jan 29, 2011 | 1996 Chevrolet Cavalier

3 Answers

My 1997 chevy cavalier wont start.its getting spark and fuel.but wont fire it has a 2.2 ecotec.


Sounds like cam belt has snapped. If it broke while starting, could be cheap fix...new belt. Worst case: cylinder head off for overhaul...bent valves / pistons replaced.

Mar 09, 2009 | 1997 Chevrolet Cavalier

2 Answers

1993 Chevy Cavalier 2.2 wont start


Have you had the Starter Checked out?

Jan 02, 2009 | 1999 Chevrolet K1500

3 Answers

1999 Chevy tahoe will not start


check the crank sensor. no signal from the crank sensor causes a no spark condition. best way to check is to put a scanner on and check for rpms.
the crank sensor is differnt from the cam sensor

Nov 02, 2008 | 1999 Chevrolet Tahoe

Not finding what you are looking for?
1999 Chevrolet Cavalier Logo

628 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...