Question about 2006 Ford Fusion

2 Answers

2006 Ford Fusion 4 cylinder. When idling in gear at stop lights, engine keeps revving up and down between 200 RPM and 1500 RPM and on many occasions stalls right out. Happens when engine is well warmed up. Dealer has not solved problem which is annoying/dangerous in city traffic.Dealer has said it may be related to air condition.

Posted by on

  • Anonymous Mar 18, 2014

    fusion se 2006 take off idle 2k rpm

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 120 Answers

Sounds like fuel pressure reg on fuel-line

Posted on Feb 20, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 157 Answers

Some of these engines have had issues with the throttle body and may need replacing

Posted on Jul 15, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to know what code 2110 ford fusion 2006 se


P2110 2006 FORD FUSION P2110 2006 FORD FUSION - Throttle Actuator Control System - Forced Limited RPM 0 Comments ' Add Yours Possible causes - Faulty Throttle Actuator Control (TAC)
- Throttle Actuator Control (TAC) harness is open or shorted
- Throttle Actuator Control (TAC) circuit poor electrical connection help.png Help with this Symptoms - Engine Light ON (or Service Engine Soon Warning Light P2110 2006 FORD FUSION Description The TAC system is in the failure mode effects management (FMEM) mode of forced limited RPM.

Read more: http://helpforcars.net/obd_codes/p2110_2006_ford_fusion.html#ixzz3mV0SayWu

Sep 22, 2015 | 2006 Ford Fusion

1 Answer

What does 2110 code on 2006 ford fusion mean


P2110 2006 FORD FUSION P2110 2006 FORD FUSION - Throttle Actuator Control System - Forced Limited RPM 0 Comments ' Add Yours Possible causes - Faulty Throttle Actuator Control (TAC)
- Throttle Actuator Control (TAC) harness is open or shorted
- Throttle Actuator Control (TAC) circuit poor electrical connection > Help with this Symptoms - Engine Light ON (or Service Engine Soon Warning Light P2110 2006 FORD FUSION Description The TAC system is in the failure mode effects management (FMEM) mode of forced limited RPM.

Read more: http://helpforcars.net/obd_codes/p2110_2006_ford_fusion.html#ixzz3mUz73ACP

Sep 22, 2015 | 2006 Ford Fusion

1 Answer

On cold start up engine revs up to 1500 rpm then down to 500rpm and keeps doing this until it warms up also sometime conks out when revving up and down


a number of possible solutions, including a vacuum leak (check hoses, use a spray throttle body cleaner o9n the intakie manifold looking for leaks), or the Idle air controller is dirty or defective, or the throttle position sensor is bad. Do you have a check engine light?

Aug 08, 2011 | 1997 Ford Escort

1 Answer

2006 FORD FUSION 2.3l i get a rapping sound in my engine it starting when i accelerated from a light and got worse with driving sounds like something is rattling around under the valve cover


Does it sound like Metal on metal noise? or like a knocking noise?

If it increases with RPM that means you may have a serious issue.

If your comfortable i'd take off one coil pack at a time and see if the knocking stops. If it stops that cylinder might have Rod Knock..

it could be valve lash, or a valve train tick as well. There are several different things sadly.

Feb 26, 2011 | 2006 Ford Fusion

2 Answers

My 2006 Chevy Silverado 1500 5.3 L engine surges +/- 200 rpm between 30-59 mph in final drive gear...in lower gears runs fine. No check engine light or computer code generated until recently which showed...


a bank 1 or a bank 2 generally means an 02 sensors bad. or you may simply have a faulty gas cap. i would try the gas cap 1st,make sure it's tight, the engine running for a few minutes,then cut engine off. then open gas cap,do you hear pressure [air] releasing from the fuel tank? ok if not that,then if bank 2 is really bad,your check engine light would be on. but if the idle control sensor is bad,no light would be on at all. and it[engine] would idle up and down.or would'nt idle at all,or would idle up and down,just like what you've described. good luck and thank you for choosing fixya.com and please let me know if i'ved assisted you!

Feb 20, 2011 | 2006 Chevrolet Silverado 1500 2WD

2 Answers

I have a 2006 Ford Fusion, 4 cylinder. Rough


please say you did not get the engine steam cleaned...as you can cost yourself a LOT of money.hopefully the heat will dry things out, otherwise get the car put on a diagnostics machine.

Jun 20, 2010 | 2006 Ford Fusion

1 Answer

Moaning, whining sound when the clutch is depressed. Gets louder when revving the engine. 2006 Ford Fusion 4 cyl 5 speed manual. I think it might be the throwout bearing but not sure. Don't know if the...


last one or i will not get up for work tomorrow,its the thrust bearing ,**** plastic fittings used ,when it goes completely ,just renew the whole lot ,if you drop subframe then they are easy to change ,about 2 hrs, but you mush drop the subframe ,its only 4 bolts two either side

Jan 12, 2010 | 2006 Ford Fusion

2 Answers

2003 4 cylinder 5-speed tiburon,engine just


This generally indicates a vaccumn leak, or sticking idle air control valve.

Jun 20, 2009 | 2003 Hyundai Tiburon

1 Answer

Engine surging high rpms at stop signs/lights...


the idle air control solenoid or a vacuum leak on backside of intake the hose that goes to pcv valve.they are both common problems on this car.check for vacuum leak firstthanks for your question....

Feb 04, 2009 | 2000 Ford Focus

Not finding what you are looking for?
2006 Ford Fusion Logo

Related Topics:

669 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...