Question about 1995 Ford F150 Styleside Regular Cab

2 Answers

I have a 5 speed trans on my 1995 f-150 and the clutch won't engage. The engine is a 300 c.i.

Posted by on

  • reillyron47 Feb 20, 2009

    The clutch pedal go's to the floor without engaging the trans

  • yadayada
    yadayada May 11, 2010

    please explain what it is doing.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 175 Answers

It may be that the shaft that connects the clutch pedal and master cylinder is broken in two. I had this happen on my 94. I was surprised to find out that the shaft was not metal but a plastic type shaft. I replaced the master cylinder for the clutch and voila, back in business. Actually I was driving down Hwy 45 in Houston when I went to downshift and the pedal went to the floor. I ended up doing a McGiver thing, used some vicegrips to hold the pedal together till I gimped it home.

Posted on Jun 28, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 70,374 Answers

The most common cause of this problem is a leaking hydraulic clutch slave cylinder, in order to replace this cylinder u must remove the trans.

Posted on Feb 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1995 Toyota Tacoma 3.4L 5-speed manual feels like 4x4 is not fully engaging.


check that the clutch is fully engaging by checking if there is free play at the throw out lever and clutch push rod . If you cannot push the rod back into the cylinder then the slipping is because the clutch is only partially engaged. Replace the clutch master cylinder if that is the case. If it is right then the fault will be in the pressure plat/ cutch plate and it may require a clutch kit.

Feb 05, 2014 | Cars & Trucks

1 Answer

'03 2.5L Ford Ranger Standard Trans, Engine at times won't turn over, does not click, battery is fully charged.


Neutral safety switch on the clutch pedal may be going out. Its a $15 fix. It tells the computer if the clutch is engaged. If it goes out its like trying to start with out pushing in the clutch, wont turn over at all. Hope this helps.

Oct 16, 2012 | 2003 Ford Ranger Regular Cab

1 Answer

My Neon. I had trans. flushed and fliter/fluid changed. Now trans. wont go into gear, have to rev engine and back off while in drive to get low to engage. over a certain speed ****** slips out again....


That proves my point that flushing is not a good idea

The flushing is not your problem entirely
It caused an already slipping transaxle to slip,
to where you can no longer use it

Any trans shop would have test driven & asked questions
& not changed the fluid

You need a complete rebuild or reman

NO FIX

The fluid change cause the already burnt clutches to
not work at all due to the different oil

Only the old dirty oil had the ability to lock up
the clutches

Oct 03, 2012 | 1999 Dodge Neon

3 Answers

1994 Buick Skylark, 138,000 mi.,V-6, auto trans. Car won't engage in gear until engine is warm. Engine must run 4-8 minutes until shifting successfully. Shift lever can be moved to all gears, but...


one thing ive warned my friends to never do and that is to never have your trans flushed cause you may have new fluids but what about the trans filter its old and iots there for that reason to keep dirt and metal; shavings from the bands so try having your oil and filter in the transmission replaced , pull your trans dip stick and on a white piece of paper put a drop of trans oil that you have in your trans at that very moment it should be redish pink but if its brown and smells really bad then the problem is in the oil and filter . change it before u have to replace the whole trans

May 06, 2011 | 1994 Buick Skylark

2 Answers

Motor fan is extremely loud!!


It is likely your fan clutch has gone bad and needs to be replaced.
Fan clutches are engineered to improve the vehicle’s cooling system efficiency. The clutch engages the fan at low speeds when additional cooling is needed. At high speeds the clutch disengages the fan, removing the load against the engine and allowing the engine to run more efficiently.
There are two types of fan clutches, non-thermal and thermal. Non-thermal fan clutches engage the fan based on the shaft speed of the water pump. Thermal fan clutches engage the fan based on a bi-metal thermostatic coil, which senses the under hood temperature.

It will look like this...


2012202.jpg 3e7a417.jpg

Apr 02, 2010 | 1995 Lincoln Town Car

1 Answer

My Lexus rx 300 won;t engage gears after spilling


The oil pump in the trans most likely blew. You will need a shop to look at this.

Dec 16, 2009 | 2004 Pontiac Grand Am

1 Answer

Overdrive light blinks when I start the car and the torque converter clutch doesn't engage


the torque converter clutch dont engage until you above a certain speed and the engine load is at a steady point.If it locked up upon start up the engine would die when you put it into gear like if you dumped the clutch on a manual trans car.
the blinking light is saying take vehicle to a qualified transmission shop to get fixed. its not a DIY problem. (do it yourself)

Nov 04, 2009 | 2002 Nissan Xterra

1 Answer

Clutch or tranny


Ok, Clutch engagement point should be midway or just before midway in relation to total travel.(pretty much the same in any clutch vehicle) assuming that if put in lets say 1st gear, with clutch in,then engine started, when clutch is released, car does not move but there are no unusual noises (grinding from inside trans.) If this is the case, I'd first check linkage for adjustment. If OK, remove the trans and look inside for broken gears, excessive metal debris etc.If shift rails are internal it could be that shift forks are sliding on rails and failing to engage synchros.

Jan 01, 2009 | 1998 Jeep Cherokee

Not finding what you are looking for?
1995 Ford F150 Styleside Regular Cab Logo

196 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...