Question about 1990 Honda Accord

1 Answer

The distributor not firing - 1990 Honda Accord

Posted by on

  • hatcher1941 May 08, 2009

    my geo tracker wont start there is fuel and spark

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 366 Answers

Tap lightly on dist. not on cap while someone cranks motor,be careful of moving parts,if it starts change ign. module in dist. if not check cap rotor,coil and power to ign.module,if theres power to module my bet would be on ign. mod

Posted on Feb 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Diagram spark plug wiring


my guess, is you removed them and didnt mark them?
the firing order?
what engine, there are 5.

to do this , one need to know 5 things.
2.5L, 2.8L, 4.0L and 5.2/5.9L engine displacements.
the distributor rotation direction CCW, or CW
and last the firing order, sometimes marked clearly on the intake manifold.
you must now where #1 cylinder is (always most front)
1989-98 2.5L Engine firing order: 1-3-4-2 Distributor rotation: Clockwise
2.8L Engine firing order: 1-2-3-4-5-6 Distributor rotation: Clockwise
4.0L Engine firing order: 1-5-3-6-2-4 Distributor rotation: Clockwise
5.2L and 5.9L Engine firing order: 1-8-4-3-6-5-7-2 Distributor rotation: Clockwise
on a v6/v8 one cylinder is more forward. this is #1, look carefully.

Nov 26, 2013 | 1997 Jeep Grand Cherokee

2 Answers

1993 lexus 300 sc firing order and distributor cap diagram


Hello! If the engine in your vehicle is the 3VZ-FE...The firing order is 1-2-3-4-5-6...Distributor rotation is Counter Clockwise...

saailer_14.gif

If the engine is a 2JZ-GE...The firing order is 1-5-3-6-2-4...Distributor rotation is Counter clockwise

saailer_15.gif
Guru...........saailer

Nov 20, 2010 | 1992 Lexus Sc 300

1 Answer

Photo of cylinder numbers on 94 dodge 3.3


FIRING ORDERS NOTE: To avoid confusion, remove and tag the wires one at a time, for replacement. Fig. 1: 2.2L and 2.5L engines Firing order: 1-3-4-2 Distributor rotation: Clockwise 85612004.gif
Fig. 2: 2.6L engines Firing order: 1-3-4-2 Distributor rotation: Clockwise 85612005.gif
Fig. 3: 3.0L engines Firing order: 1-2-3-4-5-6 Distributor rotation: Counterclockwise 85612006.gif
Fig. 4: 3.3L and 3.8L engines Firing order: 1-2-3-4-5-6 Distributorless Ignition System 85612007.gif
Fig. 5: Distributor cap terminal routing (view from top of cap) - 3.0L engines 85612008.gif
prev.gif next.gif

Nov 12, 2010 | 1994 Dodge Caravan

1 Answer

Just wondering if you have a breakdown diagram for a 1992 dodge colt 1.5l distributer


I do not have a breakdown diagram for a distributor, but just the firing orders and description of ignition system for the Dodge Colt and related models (based on Chilton manuals) if that's what you're looking for: FIRING ORDERS Fig. 1: 1990 1.8L SOHC Engines Firing order: 1-3-4-2 Rotation: clockwise 84182009.gif

Fig. 2: 1.6L DOHC Engine Firing order: 1-3-4-2 Distributorless Ignition 84182010.gif

Fig. 3: 2.0L Engine Firing order: 1-3-4-2 Rotation: clockwise 84182011.gif

Fig. 4: 1.5L Engine Firing order: 1-3-4-2 Rotation: counterclockwise 84182012.gif

Fig. 5: 1993 1.8L Engine Firing order: 1-3-4-2 Rotation: counterclockwise 84182013.gif

Fig. 6: 2.4L Engine Firing order: 1-3-4-2 Rotation: clockwise 84182014.gif

To avoid confusion, replace spark plug wires one at a time. --- Distributor REMOVAL & INSTALLATION Although the distributor can be removed from the engine no matter which cylinder is about to fire, it is a good idea to have number one cylinder at TDC before distributor removal. 1.5L, 1.8L, 2.4L SOHC Engines
  1. Disconnect the negative battery cable.
  2. Disconnect and tag the spark plug wires from the distributor cap.
  3. Disconnect the distributor harness connector.
    Fig. 1: Ignition system for the 2.0L engine 84183001.gif

    Fig. 2: Ignition system for the 1.5L engine 84183002.gif

    Fig. 3: Ignition system for the 1992-93 1.8L engine 84183003.gif

    Fig. 4: Ignition system for the 2.4L engine 84183004.gif

  4. Loosen the distributor retaining bolt and remove the distributor from the engine. To install:
  5. Rotate the engine until No. 1 cylinder is at TDC on its compression stroke. NOTE: Be careful not to turn it to the No. 4 cylinder TDC on its compression stroke by mistake.
  6. Align the distributor housing and gear mating marks.
    Fig. 5: Ignition system for the 1990 1.8L engine 84183005.gif

    Fig. 6: Distributor installation for the 1990 1.8L engine 84183006.gif

    Fig. 7: Distributor installation for the 1992-93 1.8L engine 84183007.gif

  7. Install the distributor into the engine, while aligning the fine cut (groove or projection) on the distributor flange with the center of the distributor mounting stud.
  8. Install and tighten the distributor retaining bolt.
  9. Reconnect the distributor harness connector.
    Fig. 8: Distributor installation for the 2.4L engine 84183008.gif

    Fig. 9: Distributor installation for the 1.5L engine 84183009.gif

    Fig. 10: Distributor installation for the 2.0L engine 84183010.gif

  10. Install the distributor cap and spark plug wires.
  11. Reconnect the negative battery cable.
prev.gif next.gif prev.gif next.gif

Oct 11, 2010 | 1992 Dodge Colt

1 Answer

Firing order 1987 s10 v4


FIRING ORDERS NOTE: To avoid confusion, remove and tag the spark plug wires one at a time, for replacement. If a distributor is not keyed for installation with only one orientation, it could have been removed previously and rewired. The resultant wiring would hold the correct firing order, but could change the relative placement of the plug towers in relation to the engine. For this reason it is imperative that you label all wires before disconnecting any of them. Also, before removal, compare the current wiring with the accompanying illustrations. If the current wiring does not match, make notes in your book to reflect how your engine is wired. Fig. 1: 1.9L engine Firing order: 1–3–4–2 Distributor rotation: counterclockwise 88442g01.gif
Fig. 2: 2.0L engine Firing order: 1–3–4–2 Distributor rotation: clockwise 88442g02.gif
Fig. 3: 2.5L engine Firing order: 1–3–4–2 Distributor rotation: clockwise 88442g03.gif
Fig. 4: 2.8L engine Firing order: 1–2–3–4–5–6 Distributor rotation: clockwise 85382014.gif
Fig. 5: 4.3L engine Firing order: 1–6–5–4–3–2 Distributor rotation: clockwise 85382015.gif
prev.gif next.gif

Aug 31, 2010 | Chevrolet S 10 Cars & Trucks

2 Answers

What is the firing order for a grand cherokee laredo. I change the distributor for sgrand cherokee laredo jeep. I lined up tdc, had the rotor turned to number 1, but it is still missing.


You didn't post your engine size so please choose the apprpriate diagram:



148dbd9.gif

1989-98 2.5L Engine firing order: 1-3-4-2 Distributor rotation: Clockwise



cc5a81b.gif


2.8L Engine firing order: 1-2-3-4-5-6 Distributor rotation: Clockwise



427e129.gif

4.0L Engine firing order: 1-5-3-6-2-4 Distributor rotation: Clockwise



35fbd17.gif

5.2L and 5.9L Engine firing order: 1-8-4-3-6-5-7-2 Distributor rotation: Clockwise

May 12, 2010 | 1996 Jeep Grand Cherokee

1 Answer

Need firing order diagram for 91 s10 blazer


991 Chevy S10 firing order
The firing order for a Chevy s10 depends on which engine you have.
1.9L engine the firing order is: 1-3-4-2 . Distributor rotates counterclockwise.
2.0L engine the firing order is: 1-3-4-2 . Distributor rotates clockwise.
2.5L engine the firing order is: 1-3-4-2 . Distributor rotates clockwise.
2.8L engine the firing order is: 1-2-3-4-5-6 . Distributor rotates clockwise.
4.3L engine the firing order is: 1-6-5-4-3-2 . Distributor rotates clockwise.

Jan 09, 2010 | 1991 Chevrolet S-10

1 Answer

Need fire order,spark plug wires replaced in incorrect place


For several engines....

1aa520f.jpg

Fig. 1: Buick-built 231, 252 V6 Engine firing order: 1-6-5-4-3-2 Distributor rotation: Clockwise


863ec48.jpg

Fig. 2: Olds-built 260, 307, 350, 400, 403, 455 Pontiac-built 265, 301, 350, 400, 455 V8 Engine Firing Order: 1-8-4-3-6-5-7-2 Distributor rotation: Counter-clockwise


575110c.jpg

Fig. 3: Buick-built 350 V8 Firing order: 1-8-4-3-6-5-7-2 Distributor rotation: Clockwise


d2d7f9f.jpg

Fig. 4: Chevrolet-built 267, 305, 350 Firing Order: 1-8-4-3-6-5-7-2 Distributor rotation: clockwise


fbcd2cb.jpg

Fig. 5: Chevrolet-built 262 Firing order: 1-6-5-4-3-2 Distributor rotation: clockwise


Hope helped with this (remember rated this help) Good luck.

Nov 05, 2009 | 1985 Oldsmobile Delta 88

1 Answer

Firing order for a 1986 gmc s15


FIRING ORDERS

To avoid confusion, ALWAYS replace spark plug wires one at a time.

The most important thing to remember about the removal and installation of a distributor, cap or spark plug cable is that all wires MUST be labelled before they are disconnected. Keep in mind that these figures depict a firing order where the distributor cap terminals are relative to EACH OTHER only and they do not necessarily depict the tower positions in relation to the rest of the engine. This is true because any distributor which has been removed and reinstalled may have been installed with the No. 1 spark plug tower at any position (360 degrees) in relation to the rest of the motor, as long as the rotor aligned to the No. 1 tower when the No. 1 cylinder was at TDC of the compression stroke (valves closed, ready for the plug to fire). As long as the remaining wires were connected in the correct firing order sequence (depending on direction of distributor rotation) the engine will run. DO NOT EVER remove more than one wire from the distributor cap at a time unless you tag ALL wires and towers to assure proper installation.

db45c9c.jpg

Fig. 1: 1.9L engine . Firing order: 1-3-4-2 . Distributor rotation: counterclockwise

cf6af5d.jpg

Fig. 2: 2.0L engine . Firing order: 1-3-4-2 . Distributor rotation: clockwise

5c33822.jpg

Fig. 3: 2.5L engine . Firing order: 1-3-4-2 . Distributor rotation: clockwise

cae855e.jpg

Fig. 4: 2.8L engine . Firing order: 1-2-3-4-5-6 . Distributor rotation: clockwise

9674e44.jpg

Fig. 5: 4.3L engine. Firing order: 1-6-5-4-3-2 . Distributor rotation: clockwise

I hope help you with this (remember rated this help) Good luck.

Oct 05, 2009 | 1986 GMC C1500

1 Answer

Removed & replaced dist. cap and rotor on 1993 S10 Blazer 4.3 V-6


The firing order for a Chevy s10 depends on which engine you have. 1.9L engine the firing order is: 1-3-4-2 . Distributor rotates counterclockwise. 2.0L engine the firing order is: 1-3-4-2 . Distributor rotates clockwise. 2.5L engine the firing order is: 1-3-4-2 . Distributor rotates clockwise. 2.8L engine the firing order is: 1-2-3-4-5-6 . Distributor rotates clockwise. 4.3L engine the firing order is: 1-6-5-4-3-2 . Distributor rotates clockwise.

Jul 03, 2009 | 1993 Chevrolet S-10 Blazer

Not finding what you are looking for?
1990 Honda Accord Logo

Related Topics:

340 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...