Question about 2000 Ford Expedition

1 Answer

Driver mirror mirror shakes how do you tighten it

Posted by on

  • yadayada
    yadayada May 11, 2010

    the mirror element or the entire mirror.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 4,369 Answers

The mirror glass just pops ono a ball stud. 2 jack screws go in or out by tiny electric motors. 2 friction pins go into plastic holes to prevent vibration.

Removal

  1. Position the mirror glass to obtain a gap at the lower inboard edge of the mirror assembly.
  2. Disengage the power mirror motor jackscrews from the mirror backing plate.
  3. driver mirror - syj~us~en~file=ani_caut.gif~gen~ref.gif WARNING: Place a shop towel between the mirror glass and the hand to avoid personal injury in the instance of glass breakage.
    Remove the mirror glass by grasping the outboard edge of the glass and separate it from the mirror housing.
    • If equipped, disconnect the electrical connector
  4. Remove the friction pins from the mirror backing plate.

Posted on Feb 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 gmc Denali side mirror shakes


No the mirror must be replace as the parts that move it are loss from wear. These mirrors if power cost about $300.00

Sep 17, 2012 | 2006 GMC Yukon Denali

1 Answer

How to tighten the side mirror on a hummer H3


OK. Just to make it clear it was the mirror vibrating on the swivel not vibrating on the door. I went to the store and purchased a package of those plastic "velcro" pieces. I turned the mirror in towards the door and cut a piece of the plastic big enough to fit under the mirror so it wasn't sticking out when I slide the mirror back into place. Took the backing off the plastic velcro piece and stick it to the mirror stand under where the mirror would rotate back to normal. The plastic acted as a shim and the mirror does not shack anymore. I tried to take the plastic piece off the mirror to see if there was any screws I could tighten but it looked like the mirror swiveled around a post and could not be tightened. Any why, this did the trick. I hope this will help others.

May 19, 2012 | 2006 Hummer H3

1 Answer

Drivers outside rear view mirror is loose in the mount


look under the covers and their is either a screw or a bolt that will tighten the spring loaded cups

Jul 17, 2010 | 2000 Dodge Caravan

1 Answer

The passenger mirror on my 2003 Toyota 4 Runner wobbles. How can I tighten down the mirror on the base?


With my 4 runner, I had the same problem. All I needed to do was use a phillips head screw driver and tighten up a screw that is underneath the mirror housing. i.e. there is a screw hole on under side of the hosing for the mirror. Find that hole and tighten (it may seem tight already, but just give it a little bit more torque and see if that helps)

Mar 18, 2010 | 2003 Toyota 4Runner

1 Answer

The glass in the driver side rear view mirror is loose. how do you tighten it up?


The driver and passenger side mirrors have a small rubber plug in the bottom center of the mirror housing. Remove the plug and there is a phillips head screw holding the mirror assembly. Tighten this screw about 1/8 turn and it will keep the mirror from moving around. If you remove the screw you can remove the mirror and drive motors. Use a bit of thread-lock to keep the screw from loosing again. Reinstall the rubber plug.

Jan 30, 2010 | 1991 Toyota Previa

1 Answer

Power mirrors are loose, how do i tighten them?


Hi, if the complete unit is loose you will find bolts on the inside of the door just above the door panel behind a cover (usually a triangular shaped cover), that you will have to tighten. If the mirror glass is loose you should find a hole underneath the mirror housing where you have to put a screw driver in and tighten the screw on the inside to secure the glass.

Jan 17, 2010 | 2003 GMC Sierra 1500

1 Answer

Driver side power mirror shakes


take the vehicle in for proper diagnosis... amazing!

May 26, 2009 | 2003 Ford Windstar

1 Answer

Driver side mirror loose how can i tighten it


Most mirrors have a removable cover just on the inside of the door. If you look closely where the mirror meets the door on the inside should be a snap in place cover or three screw holes with snap in covers that you remove and then use a screwdriver or small socket wrench to tighten the screws or bolts.

Joe

May 20, 2009 | 1993 Saturn SC1

1 Answer

2006 ford focus driver side mirror (electric)


Not that hard on this model.Here is a pic of the mirror and the removal and installation proceedure.

http://i253.photobucket.com/albums/hh43/chuck943/N0025797.gif

  1. Remove the exterior mirror trim cover.
    1. Release the retaining clip.
    1. Disconnect the exterior mirror control switch electrical connector.
  1. Disconnect the exterior mirror electrical connector.
  1. Remove the exterior mirror bolt.
    • To install, tighten to 11 Nm (8 lb-ft).
  1. If equipped, remove the exterior mirror screw.
    • To install, tighten to 2 Nm (18 lb-in).
  1. Remove the exterior mirror.
  1. To install, reverse the removal procedure.

Mar 02, 2009 | 2001 Ford Focus

Not finding what you are looking for?
2000 Ford Expedition Logo

Related Topics:

320 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...