Question about 1996 Chrysler Concorde

1 Answer

I need a new timing belt cover. What is the cost for this?

"Timing belt Cover"

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 6,674 Answers

Probably a dealer item, but don't forget to check recycle yards (auto wreckers) probably a few bucks and your on your way.

Posted on Feb 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change water pump


no year, stated, nor engine option so all answers will be weak to useless..... posting country helps too as other countries use different engine.... so....... be the first ever in 8000 post to do that... ill be shocked.
its in the book, its not simple like my jeeps.
its a PITA.
but you can read the words, all of them all the steps
in the FSM or at alldata.com

i log in , and put in year, and camry.
i pick cooling , i pick 1mZ engine.
i then see?///??????? (random pasted) you can too, or get and FSM.

1MZ-FE And 3MZ-FE Engines
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Drain the cooling system.
  3. Remove or disconnect the following:
    • Negative battery cable
    • RH front wheel
    • RH fender apron seal
    • A/C drive belt
    • PS drive belt
    • Engine stabilizer control rod
    • RH engine stay
    • Alternator bracket #2
    • Crankshaft pulley
    • Both timing belt covers
    • RH engine mounting bracket
    • Timing belt cover 1 and 2
    • Timing belt, guide and idler pulley sub-assembly #1
    • Camshaft timing pulleys and idler pulley sub-assembly #2
    • Timing belt cover #3
    • Water pump assembly
To install:
  1. Install or connect the following:
    • Water pump assembly with new gasket. Torque to 71 inch lbs. (8 Nm).
    • Timing belt idler #1. Torque to 25 ft. lbs (24 Nm).
    • Timing belt cover #3
    • Camshaft timing pulleys
    • Timing belt idler sub-assembly
    • Timing belt, tensioner assembly and guide
    • Engine mounting bracket
    • Upper and lower timing belts covers
    • Crankshaft pulley
    • Alternator bracket
    • Engine mounting stay
    • Engine stabilizing control rod
    • PS pump
    • A/C drive belt
    • Inspect drive belt tension
    • Right front wheel
    • Negative battery cable
  2. Refill the cooling system to the correct level.
  3. Start the engine and check for leaks.

on my car , belt off, pump out, and in, done.

Dec 13, 2013 | Toyota Camry Cars & Trucks

1 Answer

I have a massive oil leak coming from my timing cover (or gasket) in my 2000 Toyota Camry. ( About 1/2 a quart for five minutes of idle) How much does this cost to repair and how did this happe


You have more problems than the timing cover. It sounds like your crank seal is gone, or you engine oil pump leaking. Your timing cover doesn't have oil in it. . Tell your 'Mechanic '' to take the timing cover off and see where it's coming from. And while you are there you should also change your water pump. They usually have about the same life span as the timing chain. Make sure you use all new gaskets O ring and seals. Let me know what it looks like after the cover is removed. You have to remove the valve cover on some toyotas to get at the cover. Hope this info helps keep me informed Cheers from Nova Scotia

Jan 13, 2013 | Toyota Camry Cars & Trucks

2 Answers

Replacing a timing belt


1. Remove the timing chain cover. Its usually a black plastic cover on the side of the engine.
2. Loosen the timing belt tensioner. Its cylindrical shape thing made of metal and timing belt run over it.
3. After loosening it you can remove the old belt and place new belt.
4. Tighten the belt tensioner and put timing belt cover back.
Done.

Oct 22, 2012 | 1992 Isuzu Rodeo

1 Answer

How do you change a timing belt in a 2008 Chevy aveo?


place engine at TDC, remove timing cover, remover belt, install new belt, be sure cam timing marks align and engine stays at TDC, i recomend buying a service manual, they cost about 15 bucks and save alot of headaches for begginers

Mar 13, 2012 | 2008 Chevrolet Aveo

1 Answer

1999 2.3 supercharged mazda millenia s; need user/repair manual and help fixing/replacing water pump


Hello, Here are the steps for removing and reinstalling your water pump.
Removal
  1. Disconnect the positive battery cable.
  2. Put a drain pan under the radiator and drain the coolant. Drain the coolant out via the drain plug on the radiator.
  3. When drained close the drain plug.
  4. Put another drain pan under the timing belt cover.
  5. Now you need to remove the timing belt cover.
  6. Use a ratchet and remove all the bolts to the time belt cover.
  7. Remove timing belt cover.
  8. When you get the cover off remove the timing belt.
  9. ***NOTE*** due to the time, labor and potential cost of replacing the water pump and the fact that the timing belt is right there it is recommend to put a new timing belt on during the installation process.
  10. Remove the bolts that secure the coolant inlet pipe with a ratchet.
  11. Remove the pipe and gasket.
  12. Remove the belt and idler pulley attached to the water pump. Don't get and coolant or grease on it.
  13. Now you need to remove the mounting bolts from the water pump with a ratchet.
  14. Remove the pump.
  15. Inspect the seating of the gasket real well.
  16. Remove all the crud off it with a lint free rag, I repeat lint free rag.
Now to install the new water pump
  1. Install the new water pump with the new gaskets provided. Never reuse the old gaskets.
  2. Install mounting bolts and torque them at 14-18 foot pounds.
  3. There is a bolt that will connect the alternator bracket to the water pump that needs to be torqued at 23-38 foot-pounds.
  4. Reinstall the idler pulleys and tighten down with your ratchet.
  5. Replace the gasket for the coolant intake pipe with the new gasket.
  6. Now torque the remaining bolts to 14-18 foot pounds.
  7. Slide the [hopefully new] timing belt back.
  8. Reattach the timing covers.
  9. Tighten them bolts with your ratchet.
  10. Use a mix of 50% water and 50% antifreeze and fill up the radiator and overfill.
  11. Squeeze the radiator hoses a few times to get the air out of the hoses.
  12. Hook your battery back up.
  13. Start the car and let it heat up to full running temperature, with the heat on and check for leaks.
  14. Now top off the coolant level again.
  15. Go for a short drive.
  16. Reinspect for leak.
  17. End of job.
Regards, Tony

Mar 24, 2011 | Mazda Millenia Cars & Trucks

1 Answer

How do you set the timming on a 2.3 when your putting the new timming belt on


The IGNITION timing on your Ranger is computer-controlled and is not adjustable.


Should the camshaft drive belt/timing belt jump timing by a tooth or two, the engine could still run; but very poorly. To visually check for correct timing of the crankshaft, auxiliary shaft, and the camshaft follow this procedure:
There is an access plug provided in the cam drive belt cover so that the camshaft timing cam be checked without moving the drive belt cover.
  1. Remove the access plug.
  2. Turn the crankshaft until the timing marks on the crankshaft indicate TDC.
  3. Make sure that the timing mark on the camshaft drive sprocket is aligned with the pointer on the inner belt cover.

Never turn the crankshaft of any of the overhead cam engines in the opposite direction of normal rotation. Backward rotation of the crankshaft may cause the timing belt to slip and alter the timing.
REMOVAL & INSTALLATION

See Figures 1, 2 and 3


0996b43f80211842.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 1: Timing belt cover on the 2.3L and 2.5L engine


0996b43f80211843.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 2: Timing belt assembly on the 2.3L and 2.5L engine


0996b43f80211844.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 3: Releasing the timing belt tensioner using a special tool

  1. Rotate the engine so that No. 1 cylinder is at TDC on the compression stroke. Check that the timing marks are aligned on the camshaft and crankshaft pulleys. An access plug is provided in the cam belt cover so that the camshaft timing can be checked without removal of the cover or any other parts. Set the crankshaft to TDC by aligning the timing mark on the crank pulley with the TDC mark on the belt cover. Look through the access hole in the belt cover to make sure that the timing mark on the cam drive sprocket is lined up with the pointer on the inner belt cover.

Always turn the engine in the normal direction of rotation. Backward rotation may cause the timing belt to jump time, due to the arrangement of the belt tensioner.
  1. Drain cooling system. Remove the upper radiator hose as necessary. Remove the fan blade and water pump pulley bolts.


Dec 11, 2010 | 1995 Ford Ranger Supercab

1 Answer

1989 tercel major oil leak passanger side. how do i change the oil pump gasket? do i need to change timing belt too? N where is the unit located? is it under the cover between the valve cover and oil pan?


The oil pump is located under the black timing cover , however your leak is likely the lower main seal under that cover as well , your oil pump will be on the upper right side , you should replace them both and the timing belt while your there considering the cost of the parts , it is good insurance you wont lose your belt while you still own your car and have to go back in again , it is not hard to do just be patient , also when you loosen off your timing belt tensioner '' to remove the belt ''dont forget to re tension it after you replace it

Nov 28, 2010 | 1990 Toyota Tercel

1 Answer

I am putting on a new timing belt,need to know the aligned timing marks for a 2003 kia,rio 1.6l


.6L (VIN 3) & 2.0L Engines
  1. Before servicing the vehicle, refer to the Precautions Section.

  2. Remove or disconnect the following:

    • Negative battery cable

    • Engine cover

    • Right-hand front wheel

    • Right-hand wheel well side cover

    • Accessory drive belts

    • Water pump pulley

    • Timing belt upper cover

  3. Turn the crankshaft pulley so cylinder No. 1 is at Top Dead Center (TDC). Align the pulley groove with the timing mark "T" of the timing belt cover.

  4. Remove or disconnect the following:

    • Crankshaft pulley

    • Crankshaft flange

    • Lower timing belt cover

    • Timing belt tensioner

    • Timing belt To install:Align the timing marks of the camshaft and crankshaft sprockets to ensure the No. 1 cylinder is at TDC.Temporarily install the timing belt tensioner.Install the timing belt over the crankshaft sprocket, then inside the idler pulley, over the camshaft sprocket and then inside the timing belt tensioner.Apply tension to the timing belt by turning the tensioner in the clockwise direction so there is no slack in the belt on the tension side.Tighten the tensioner mounting bolts to 20 ft. lbs. (27 Nm).Check the timing belt tension as follows:

    • 1.6L (VIN 3) engine: Push the tension side of the belt in horizontally with a moderate force, the timing belt cog end is approximately 1/2 of the tensioner mounting bolt head radius away from the bolt head center.

    • 2.0L engine: Push the tension side of the belt in horizontally with a moderate force, the timing belt cog end sags approximately 0.16-0.24 inches (4-6 mm).

  1. Turn the crankshaft two turns in the clockwise direction and realign the crankshaft sprocket and camshaft sprocket timing marks.

Oct 23, 2010 | 2003 Kia Rio

2 Answers

Timing Belt broke, I need copy of procedures to install a new one


Try the autozone.com website. If you register the vehicle you will have access to an online repair manual for the car. It's free and the steps for changing the timing belt may be available there. Regardless, it's a handy resource for doing maintenance on your car. Hope this helped and best wishes.

Sep 09, 2009 | 1991 Geo Metro

5 Answers

How to fix a Timing belt


how to change a timing belt

Aug 03, 2008 | 1997 Kia Sephia

Not finding what you are looking for?
1996 Chrysler Concorde Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...