Question about 1999 Pontiac Grand Am GT

2 Answers

Torque on manifold intake on a pontiac grand am

Posted by on

  • cbitsui55 Feb 20, 2009

    thank you very much



×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,011 Answers

18ft pounds over torque will prematurely ruin gasket

Posted on Feb 20, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Pontiac Master
  • 70,387 Answers

35ft pounds.

Posted on Feb 20, 2009

4 Suggested Answers

  • 1201 Answers

SOURCE: need head bolt,intake upper and lower and rocker arm torque lbs.

Head bolts--------- 22 ft lbs.
Intake upper------ 18 ft lbs.
Intake lower------- 10 ft lbs. Tighten vertical bolts first, the diagonal bolts, failure to do this will result in an oil leak.
As far as the rocker arm bolts, they have to be adjusted with the valves closed, tighten down just enough to turn the push rods with your fingers with slight tension.
This is out of a Technical Specifications Manual.

Posted on Jul 30, 2009

abauto
  • 353 Answers

SOURCE: what are the torque specs on a 2004 grand prix

Here they are5546824.jpg

Posted on Oct 30, 2009

  • 279 Answers

SOURCE: looking for torque specs and sequence of both

Lower intake bolts 11 ft. lbs start in the center of the intake and work your way out cross from side to side.Tighten the upper intake bolts with the same procedure with 89 inch pds.Be sure to apply threadlocker to the lower intake bolt threads.

Posted on Feb 07, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove intake manifold for 1997 pontiac grand prix


You have to remove anything that is connected and in the way of the intake. Remove the fuel rail, the EGR valve and supply pipe from the manifold, the map sensor, the vacuum for the fuel pressure regulator, the alternator and support bracket, the water pipes for the throttle body, and the bolts that hold it down.

Jun 09, 2015 | 1997 Pontiac Grand Prix

1 Answer

What are the intake manifold torque specs on a 2005 Pontiac grand Prix gtp 3.4 liter with super charger?


If it were mine, I'd want to be very sure what it was and so I always use a Repair Manual I can see and read, but that me.

Mar 13, 2015 | 2005 Pontiac Grand Prix GTP

1 Answer

Rocker arm torque spec and intake manifold torque spec and pattern


I could not answer this any better than what I have found online. Here is a guy that has posted removal and re-installation in great detail as well as great photos.
LIM and Head Gasket Change Walkthrough FAQ GrandAmGT com Forum

I give all the credit for this answer to the poster.

Sep 12, 2014 | 2002 Pontiac Grand Am

1 Answer

WHAT IS THE TORQUE SPECS FOR INTAKE GASKETS


The torque specs are
-for intake manifold-to-cylinder head bolts/nuts
1996 and later-----132 in-lbs
-for intake manifold, upper to lower bolts
1995 and later-----89 in-lbs
-for cylinder head bolts
2001 and later----step 1--37
step 2--Turn an additional 120 degrees
I hope that this helps you out.

Jun 17, 2014 | 2003 Pontiac Grand Am

1 Answer

2004 pontiac grand am 3.4 intake manifold torque speck


lower manifold center bolts 115 lb in, corner bolts 18 lb ft
upper intake bolts/stud 18 lb ft

Feb 26, 2013 | 2004 Pontiac Grand Am

2 Answers

I need lower manifold rocker and upper manifold torque instructions please help


Head Bolts
Torque sequence --------- ' 6 2 3 7 ' ' 5 1 4 8 ' --------- Step 1: torque in sequence to 33 Ft/Lbs Step 2: turn an additional 90 degrees recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) that permanently stretch during the initial installation.New head bolts must be used when cylinder head is replaced or re-installed to obtain proper torque.Always coat bolt threads with the proper sealant.
The Intake Bolt Torque 10 Foot pounds (Final torque)
Note:to torque bolts & nuts, start in center using crisscross pattern working outward

Dec 05, 2010 | 2000 Pontiac Grand Am GT

1 Answer

1993 pontiac grand prix 3.1L V6 need a diagram for intake manifold tighten specs.


The sequence and the torque values can be had via a Chilton's manual or Haynes manual.

I have searched for these values, but the sites always make reference to the manuals.
Average price of a manual can be from $5.95 to $25.

good luck and don't forget to vote!!!

Sep 28, 2010 | Pontiac Grand Prix Cars & Trucks

2 Answers

What are the torque measurements for the rocker arms and intake manafold?


2.2L Engine & 2.4L Engines
These engines are not equipped with rocker arms. The camshafts directly actuate the valves.

3.1L Engine & 3.4L Engines
When install or connect the check the following:
- Pushrods and the rocker arms. Torque the bolts to 24 ft. lbs. (32 Nm). - Rocker arm cover using a new gasket. Torque the rocker cover bolts to 89 inch lbs. (10 Nm).
- Heater bypass pipe. Torque the screw at the water pump to 106 inch lbs. (12 Nm), the bolt at the cylinder head corner to 18 ft. lbs. (25 Nm) and the nut to 18 ft. lbs. (25 Nm).


About the INTAKE MANIFOLD...
-
Intake manifold nuts and bolts and tighten to 89 inch lbs. (10 Nm)
- Pushrods and rocker arms. Torque the bolts to 89 inch lbs. (10 Nm) plus an additional 30 degree turn. - Lower intake manifold. Apply sealant to the threads of the bolts and torque the bolts to 115 inch lbs. (13 Nm).



859cdc3.jpg

Exploded view of the upper and lower intake-3.1L & 3.4L engines


fe92b8b.jpg

Fig. Lower intake manifold tightening sequence-3.1L & 3.4L engines

Hope help.

May 04, 2010 | 2000 Pontiac Grand Am GT

Not finding what you are looking for?
1999 Pontiac Grand Am GT Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...