Question about 2000 Daewoo Nubira

1 Answer

I can`t change gears the gear lever has gone limp it feels like a clutch or clutch cable I neen a diagran og gearbox

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Standing in front of the car walk around to the passenger side and look in to where the gear shift arm comes through the fire wall you will see a gear shift tube bellows with a clamp and bolt coming through and at the end you will see the "gear shift guide control"(7) there is a "gear shift control mode" (6) that clips over a round ball at each end one clip faces front and one back ,one towards the middle of the car and one closer to the passenger side of the car , this had come undone at both ends and dropped off, by replacing this the problem was solved.
The part numbers ( 7 ) and ( 6 ) are from a shift linkage diagram pages 21 and 22 found on the internet through http://www.daewooclub.cook/forums/showthread.php?tid=1002
I hope this is of help to someone else out there
Gary

Posted on Feb 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I had new clutch fitted 3 weeks ago now the gear stick has gone loose and I only have 3rd and 4th gear


Sounds like one of the rods between the gear lever and gearbox has become detached. One rod transmits the forward-backward motion, the other left - right, with the "natural" bias keeping the lever in the 3rd / 4th gear plane - hence why you've only got 3rd and 4th gear.

You should have some guarantee from the company that fitted the clutch so contact them to sort it out.

Mar 14, 2015 | 2006 Peugeot 207 1.4

1 Answer

Gear lever is not activating but the clutch is fine


problem with linkage cables. get under vehicle and select a gear
manually with engine off, then climb inside, start up with clutch
pedal depressed, release clutch, if nothing happens, problem in gearbox, if it takes off, problem with linkage cables.

Apr 03, 2014 | Toyota Quantum Cars & Trucks

1 Answer

Hi, I have Audi A3 Cabriolet manual gearbox. I was on the queue to work the car was on 1st gear, when I released the clutch I heard the funny noise like something knocked. Then from there I could not feel...


sounds like your shifting cable might of come off check and see if its still hooked up to the transmission just follow where it comes down from the stick shift into the tranny. hope this helps

Sep 11, 2013 | Cars & Trucks

1 Answer

PrEngine is running, gearbox linkage can be seen moving looking down from engine - when driver puts lever into gear, gearbox not engaging - with or without clutch applied. Possible areas which could...


Unfortunately the problem will need investigating. There must be a problem with the flywheel / clutch assembly or the gearbox itself. The fact that you can move the gear linkage indicates that there is no drive in the gearbox ( ie not turning). The only items that effect this are the clutch / flywheel assembly or the primary shaft in the gearbox.
The gearbox will have to be removed and the above checked.

Sep 08, 2011 | 2001 Volkswagen Golf

1 Answer

I have 1990 accord lx 5speed that is stuck in 4th gear but the shifter moves in all gears..To get home I had to ride the clutch in 4th all the way home..Checked the links from shifter to trans everything...


Do you still feel the same feedback from gear lever when you change gear or it appear loose? It looks like a gearbox problem, maybe due to low gearbox oil something has broken inside the gearbox.

Aug 17, 2011 | 1991 Honda Accord

1 Answer

How do i adjust my clutch? and it's really hard to change the gear especially reverse.


Some models have selfadjusting cables, some - regular with adjusting screw next to the gearbox lever.Check yours.If there is not adjustment go to next step.Put new clutch kit.I think also first gear is difficult to switch ON

Apr 21, 2010 | 2001 Volkswagen Jetta TDI

1 Answer

Gear box for ed sedan


If the actual gear stick is hard to move you will find the linkages are stuck on something, if it moves freely and still doesnt change theres two things it could be, first is motor was incorrectly installed or second is the gearbox has gone into limp mode, limp mode is a factory set mode that keeps the car in 3rd gear for a 3 speed or 4th in a 4 speed, in the ba's i had this problem with my car, limp mode is only a safety measure to get you home and should be looked at immediatley.

Jan 12, 2009 | 2005 Ford Futura

2 Answers

Manual shift will not engage in gears


hi from uk just out of curiosity ? with engine off try selecting a gear manually by moving the selector link at gearbox from engine compartment if you can feel a selection ? then press clutch and start engine see if car moves with clutch slowly engaged ? if it does? then would suspect the actual g/stick vertical part that fits into the cables gate/selection has broken ? come back with update ? and please give history prior to this fault occuring ?as it would give more of idea what may have gone wrong ?

Jan 03, 2009 | 2000 Hyundai Accent

1 Answer

My gear stick is limp or broken. The clutch is fine. There looks as though there was a plastic piece broken where the gear stick is. Is this the cause.


i had a 90 model excel and one of the shifter cables broke and caused a limp feeling on 2,4,R gears. The cable back then ran 250 to replace one cable and there are two of them in there.

Aug 09, 2008 | Hyundai Excel Cars & Trucks

Not finding what you are looking for?
2000 Daewoo Nubira Logo

315 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

yadayada
yadayada

Level 3 Expert

70365 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...