P1062 code on a 2008 mini - 2008 Mini Cooper Hardtop

You need to get the radio security code from the dealer.

For Mini radio codes contact this link: Car radio codes in Uxbridge London Gumtree

Hi
this is the Variable valve timing (VVT), bank 1 - limp-home mode - full stroke position not reached P1062 and the P1050 is the VVT control unit itself, try checking the connections to it make sure they are secure, if all looks good, then you might have to change the unit as this will keep making the vehicle go into limp mode.
hope that helps

. P1050 Variable valve timing control circuit, bank 1 -circuit malfunction

P0301 is number one cylinder is misfioring.

Bank 2 sensor 3 [HOS2] .

try looking on that website for infos.


http://www.obd-codes.com/trouble_codes/


hope to help.

71
*
Dynamic Stability
Control (DSC)
Brake pads!
Replace
Brake pads
The brake pads are worn.
Have them replaced by the nearest BMW Service.

P0012 "A" Camshaft Position - Timing Over-Retarded

you should probably take it to a bmw dealership or other qualified shop