Question about 1999 Pontiac Grand Am GT

1 Answer

Cruse control dont work

Lite on wheel comes on but will not work

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Have someone hold the cruise button on while you check power at the servo.If you have power the servo is bad

Posted on Feb 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 impreza Abs light on and cruise control not working


From what I have read the flashing cruse light is to get you to fix the problem. Any cel will throw the cruse light and cruse will not work. Get your abs checked out and cruse will work again when fixed.

Mar 30, 2014 | Subaru Impreza Cars & Trucks

1 Answer

The cruse control on my 2001 ford expdeition do not work, my horn works,my brake lights work, when I hold down the cruse button, it dont come on, I want to check the fuse but I dont know which one to pull


i would look at the fuse box, and inside , it should tell you what fuse is for what, if it doesn't, i would recommend you looking it up in your owners manual.

Feb 14, 2011 | 2001 Ford Expedition

1 Answer

How does one remove the cruse control switch cluster from the steering wheel of 2006 Ford Fusion?


dont. air bag and "winder" issues. get a pro to do it or it will just cost you more, maybe kill you.

Jan 06, 2011 | Ford Fusion Cars & Trucks

2 Answers

Ive replaced the brake lite switch twice on my 1996 grand chrokee -when the cruse control is on it will only engadge if i lift up on the brake pedel-but soon as the pegel drops it turns off the cruse...


the brake light switch is part of your cruise control circuit. check the adjustment. it should be threaded so that you can change the depth on it. probably not your switch at all.

Mar 26, 2010 | Jeep Grand Cherokee Cars & Trucks

1 Answer

Replace steering shaft now airbag light stays on horn dont work and the cruse control dont work help!!!


sounds like the steering wheel got turned during the proceedure to replace the shaft which means that you broke the clock spring which sits under the steering wheel.

Apr 19, 2009 | 2005 Chevrolet Malibu

1 Answer

Cruse control on 01` buick lesabre only works when the button on wheel is held down


IM GUESSING YOUR TURN SIGNAL SWITCH IS BAD U HAVE TO TAKE OFF UR STERING WHEEL OF SO YOU COULD GET TO THE WHOLE PICE OR ELS UR CRUSE CONTROL ON THE PEDAL IS BAD

Feb 18, 2009 | 2001 Buick LeSabre

1 Answer

Cannot find cruise control


hi there
you will find a switch some where near the dash light dimmer switch that will say off and on
what you need to do
  1. have the car going in a forward moton and doing 40kph or more
  2. when you have reached the desired speed that you wish to set you need to turn the cruse control on then at the strearing wheel you will see a button saying "set"
  3. once the light on the dash bord has come on then you can take your foot off and it should remain at the speed you set it at.
now some tips and did you know
  1. when you have set a speed you can increase it by pressing the plus or minus button to either increase or decreas your speed and it will automatically remember it
  2. when you want to over take and you have your cruse set at a speen you can use the exelaretor to go faster and once you have passed you can press resume to go back to the speed you where doing before you applyed more power
  3. did you know cruse control is more economical then usng the exelarator it can save you fuel.
  4. do not use cruse control in wet weather as it can cause a skid if you hit a p[uddle of water laying on the road
  5. to stop the cruse form working just put your foot on the break

hope this helps
ricko

Dec 29, 2008 | 2001 Jaguar S-Type

1 Answer

Turn signals dont work at all the green arrow doesnt even come on i already replaced the flasher relay but im being told there is another one where is it


hello. check you fuse panal. look in the user manual that came with the car. it will have a fuse panal diagrame of what fuses control what. check if the twight senenal is working. it might be burned out. it will be located behind down to the right of your cruse control on off switch. wiper switch top headlight switch mid- cruse bottom. your cruse control switch and your headlight switch will have to be removed to get at the twilight sentenal switch. mabe your turn signal lights are buned out. you can replace them. you will have to remove your speedometer panal to get at them. an other posabllity is that your turnsignal switch on the steering collom isn't working. I segest that you buy the haynes repaire book. you can get it at canadiantire. and online at amazon.com. your fuse pannal should be down on the bottom left on the drivers side underneath the dashboard where your parking break is.

Dec 22, 2008 | 1989 Cadillac Brougham

2 Answers

Cruse control not working


Check the air control hoses for the cruise control.

Oct 24, 2008 | 1999 Plymouth Voyager

Not finding what you are looking for?
1999 Pontiac Grand Am GT Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...