Question about 1998 Chevrolet K1500

1 Answer

Change out power steering pump on a 98 chev silverado

Posted by on

  • 1 more comment 
  • quest5397987 Feb 20, 2009

    my high pressure line on my power steering pump is leaking at the compression fitting can i change it without removing the pump too and if so do i need a special wrench to remove it?

  • quest5397987 May 11, 2010

    my high pressure line on my power steering pump is leaking at the compression fitting can i change it without removing the pump too and if so do i need a special wrench to remove it?

  • mike loshbough
    mike loshbough May 11, 2010

    yes and?????????????

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 52 Answers

It's under the ac comressor. on the driver side.

Posted on Oct 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1998 chevy 2500.the sterling is hard to steer and the fluid is come out the cap.any idle what's going on.


Fluid Coming Out Power Steering Pump Cap - Taurus Car Club of ...

www.taurusclub.com > ... > Maintenance and Repair
Jan 9, 2010 - 2003 Vulcan has leak through cap on power steering pump. ... Hi I'm having the same thing happening to my 98 duratech. I was just getting ready to replace the rack today because of fluid coming out the drivers side boot... so decided to ... to be removed and that the bolt is recessed and difficult to reach.

Power steering issue - DodgeTalk : Dodge Car Forums, Dodge Truck ...

www.dodgetalk.com > ... > 2G Dodge RAM - General Talk
Jan 25, 2009 - Power steering issue 2G Dodge RAM - General Talk. ... Location:Sterling Heights, MI ..... pump, top off the reservior, screw on the cap, drop the truck and go drive it. .... I was able to loosen the pump and just dumped out the old fluid and.... I figured the belt was still good but the noise was definitely coming ...

Chevy Silverado Chrome Accessories - AutoAnything

www.autoanything.com/.../Chevy/.../110A50167A0A0A115A2690A1.as...
The Heartbeat has far better tastes when it comes to Chevy Silverado chrome accessories, and ... Check out our tail light chrome for Silverado rigs and you'll see what we mean. ... Chevy Silverado 2500HD Chrome Accessories .... 2012, 2011, 2010, 2009, 2008, 2007, 2006, 2005, 2004, 2003, 2002, 2001, 2000, 1999, 1998 ...

chevy bed rail caps - AutoAnything


Feb 03, 2016 | Sterling Cars & Trucks

1 Answer

DIAGRAM OF POWER STEERING, PUMP AND HOSES FOR 93 CHEVROLET SILVERADO


you can find it on the web "1993 chev Silverado power steering diagram"

Feb 17, 2015 | Chevrolet Cars & Trucks

1 Answer

I just replaced the springs in my 94 chev silverado and now I have no power steering, fluid boils and over heats really quickly, replaced pump and hoses, is it possible the steering box could have a b


if it was no problem before the spring change then go back to what you did with the suspension as it is possible that you are overloading the pump. Other than that for the oil to heat up and boil there has to be energy going into the oil Pump spinning under pressure with no release of the oil. Oil pumps have no pressure unless the steering valves are up set where they close off and move the steering until you stop moving the wheel . At this point the valves open and release the pressure back to the reservoir

Nov 19, 2014 | Cars & Trucks

1 Answer

How do you remove the power steering pump from a 2001 Chev Blazer with the 4.3 engine?


4.2L Engine
  1. Remove the air cleaner assembly.
  2. Remove the drive belt.
  3. Install a drain pan under the vehicle.
  4. Disconnect the power steering pressure hose from the power steering pump.
  5. Disconnect the power steering cooler hose from the power steering pump.
  6. Disconnect the wiring harness from the wiring loom on the power steering pump.
  7. Remove the power steering pump mounting bolts.
  8. Remove the power steering pump.
  9. Remove the power steering pump pulley.
  10. Remove the power steering pump pulley using Power Steering Pump Pulley Remover tool no. J 25034-C, or equivalent.

Oct 30, 2010 | 1993 Plymouth Acclaim

1 Answer

Power steering leek


look and see if possible it may be coming from the power steering pump shaft seal. if you look close it may be leaking from there let me know thanks

Mar 04, 2010 | 1999 Chevrolet Suburban

3 Answers

Is the power steering pump in a chevy 1/2 ton 5.7 l 1998 electronic?


vladkov your an idiot power steering systems run on hydraulic power. The pump is driven by the engine with forces fluid through the gear and assists your steering efforts. I have changed my steering gear twice and my pump. There's nothin electronic about it. Steering assist is electronic and thats a whole diifferent ball game, it only comes on newer vehicles. Changing a p/s pump on a 98 chev is pretty simple, you just need a puller to pull the pulley off so you can get at the mounting bolts. Take those and your 2 lines off (making sure to mark which one goes where) and that's pretty much it.

Nov 30, 2009 | 1998 Chevrolet K1500

1 Answer

Power steering pump replacement on 2002 chev


u will need 2 special tool to remove and reinstall the powersteering pully
it must be removed to acess the bolts to replace the pump and a new pump dose not come with pully

Nov 26, 2009 | 2002 Chevrolet Silverado 2500HD

2 Answers

2004 Silverado Power steering


Pump is starting to fail. Good news is that it isn't too hard to change. Hope this helps...

Sep 08, 2009 | 2000 Chevrolet Silverado 1500

2 Answers

2004 chev silverado ext cab. No Power steering


Hi Hollings,

You description was very good, I need to ask for a specific.

When you turn to the left, the wheel is stiff like the engine is off or does it turn smoothly but the vehicle doesn't turn or seem to respond.

I'm trying to rule out broken mounts,

Also, if the wheel is all the way to the right, is it difficult turning back to the left the whole way, or half way. See where I'm going.?

Please comment back your findings

Best regards
Mike

Sep 07, 2009 | 2004 Chevrolet Silverado 1500 Crew Cab

3 Answers

Power steering & power brakes


Sounds to me like your power steering pump has gone bad. Being a vehicle with a hydro-boost brake system that would explain the power brake failure. Hydro-boost brake systems utilize pressurized power steering fluid to provide brake assist. In most lighter GVWR vehicles this function is performed by engine vacuum. There is a recall on certain Silverados and Sierras that addresses a faulty check ball in the booster, but your vehicle is affected by a steering issue as well. This would indicate to me that it is the pump. You can however check online to verify if your vehicle is affected by the recall. Hope this helps.

Nov 04, 2008 | 2002 Chevrolet Silverado

Not finding what you are looking for?
1998 Chevrolet K1500 Logo

Related Topics:

228 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...