Question about 2007 Mazda B2300

1 Answer

Hard shift from 1st to 2nd gear automatic

My truck has to reach 2000 rpm's before it will shift to 2nd gear. There is no slipping and all the other functions work properly. Downshifting, 2nd to 3rd, 3rd to OD, passing gear and so on. It just has a hard shift when shifting to 2nd.

Posted by on

  • 1 more comment 
  • barrycokerma Feb 19, 2009

    This is a 94 model. I think it may be in the valve body as I can't find any vacumn leak and as I understand it the trans shifts by fluid pressure?

  • Colin Stickland
    Colin Stickland Jan 05, 2014

    In which case its either a vacumn leak on a thin pipe going to the gearbox which i would suspect first of all or if thats ok then check the valve that the pipe goes too ,if all this checks out then the brake band wants adjusting which could be simpler than you think as their coulod be adjustment on the outside of the box but without a look my self i honestly couldnt tell you as iam not a main dealer fitter iam a back street constructive engineer ---thats the posh term for a backstreet coyboy

  • Anonymous Mar 20, 2014

    it sometimes happen that my rpm reaches o 3000rpm but 2nd gear did not shift

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mazda Master
  • 21,949 Answers

What year is vehicle please ?? as people often put it in wrong catagory ,if its mazada 2007 then its dealer only as a computer controls it all and the software is factory encrypted to stop general garages from repairing it .But check for a vacumn pipe loose under bonnet ,thin rubber pìpe from inlet manifold to gearbor or a diaphram switch,

Posted on Feb 19, 2009

  • Colin Stickland
    Colin Stickland Feb 20, 2009

    check the kick down control cable

  • michael odom
    michael odom Jan 04, 2014

    it a ford f 150

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What's the normal rpm while shifting gears on an automatic 2006 c230?


No such figure. Shift points can be near the redline RPM or just above idle, it depends on hard you press the gas pedal.

Mar 25, 2014 | 2007 Mercedes-Benz C230 Sedan

1 Answer

1987 escort doesnt shift untill 3000 rpm


Depending on what gearing setup the car was originally put on, most cars that I have owned that were automatic shifted between 3000 and 4000 RPM. My 97 Ford Escort ZX2 needed to shift around 2000 RPm from 1st into 2nd, but it was a manula which allows you to feel the point of shift alot better. maybe have your onboard computer checked and tranny serviced.

Aug 28, 2013 | 1996 Ford Escort 4 Door

1 Answer

My 92 dakota shifts hard from 1st to 2nd gear but does shift to all gears?


For Automatic transmission problem,click the link below:---- Automatic transmission troubleshooting:----

http://howtobyme.blogspot.com/2011/11/automatic-transmission-will-not-go-into.html

---------
Automatic transmission shift lever issues?-------

http://technoanswers.blogspot.com/2012/01/automatic-transmission-shift-lever-hard.html

-----------
AUTOMATIC TRANSMISSION FLUID LEVEL? --

http://schematicsdiagram.blogspot.com/2011/07/how-to-check-automatic-transmission.html

--------------

AUTOMATIC TRANSMISSION FLUID AND FILTER?

http://schematicsdiagram.blogspot.com/2011/07/how-to-change-automatic-transmission.html

-----------
Transmission fault light on car dash?

http://schematicsdiagram.blogspot.com/2011/12/transmission-fault-light-on-car-dash.html

--------
Transmission shifting problem?

http://schematicsdiagram.blogspot.com/2012/01/transmission-shifting-problem-on-toyota.html

--------
Transmission Slips out of 2nd gear?

http://repairhelpcenter.blogspot.in/2012/02/transmission-slips-out-of-2nd-gear.html

-----------
OD light flashing and transmission fluid leaking?

http://repairhelpcenter.blogspot.in/2012/02/od-light-flashing-and-transmission.html

----------
Why Transmission fluid leaks near radiator?

http://repairhelpcenter.blogspot.in/2012/02/transmission-fluid-leaks-near-radiator.html

----------
Transmission fluid leaking?

http://technoanswers.blogspot.in/2012/02/ford-windstar-transmission-fluid.html

-------------
****** wont go in reverse?

http://technoanswers.blogspot.in/2012/02/dodge-neon-wont-go-in-reverse.html

-------------
Automatic transmission will not go into reverse?

http://technoanswers.blogspot.in/2012/02/dodge-automatic-transmission-will-not.html

----------
Transmission is making buzzing noise?

http://technoanswers.blogspot.in/2012/02/transmission-is-making-buzzing-noise.html

-----------

This will help.

Thanks.

Feb 03, 2012 | 1992 Dodge Dakota

1 Answer

Hard shifting from 1st to 2nd


I have been hearing a possible solution for this problem is changing the oil filter in the trans oil pan. But ive been looking all over for a solutionand thats the only legit one ive found. It said when the oil gets clogged it doesnt flow to the transmission as nicely as normal therefore leading to lagging changes

Mar 21, 2010 | 2003 Chevrolet Monte Carlo

1 Answer

1998 Dodge Grand Caravan will not shif into 2nd


Most likely the second gear section of the transmission has gone bad. There are 3 or 4 different gear sections or assemblies in an automatic transmission, when they go bad, they go bad.

Mar 06, 2010 | 1998 Dodge Grand Caravan

1 Answer

Hard shift from 1st to 2nd, then 2nd to 3rd.


Dont think they changed it yet but the older chrysler units had a rod that went from the throttle linkage to the transmission (maybe a cable now)...If you lengthen the rod it will increase shift pressure and give you an earlier shift.

Jul 17, 2009 | 2002 Dodge Dakota Club Cab

1 Answer

Hard shift from 1st to 2nd. Engine rpm goes to 3000.


the tranny is slipping ,,in other words its starting to go.

Jun 27, 2009 | 1996 Ford Mustang

1 Answer

Transmission problems


Yes, it could very well be a bad transmission.

Apr 30, 2009 | 2000 Ford Explorer

2 Answers

Slight miss in engine, hard shift from 1st to 2nd long 2nd gear


Check both O2 sensor(s) and catalytic coverter.. P0420 means catalyst below threshold. Also check the sensor at the transmission and solenoid.

Feb 06, 2009 | 1995 Chevrolet Blazer

1 Answer

Hard shift and blinking overdrive


The blinking overdrive button is telling u that a serious fault has occurred in the electronic controls or a mechanical fault such as excess slippage is occurring.

Jul 16, 2008 | 2000 Ford Ranger SuperCab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

622 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...