Question about 1999 Dodge Ram 2500 4WD

1 Answer

No turn signals or brake lights in rear unless the 4 way hazard switch is on...then I have no 4 ways. can any one help it is not the 4 way switch have replaced that and all the fuses are good under the hood?

Posted by on

  • 4 more comments 
  • kmagee57 Feb 19, 2009

    have electronic flasher to replace next. Have not put it in yet. Will let you know.

  • kmagee57 Feb 19, 2009

    I don't know how this got posted under a 99 it is a 2002 Ram 2500 diesel.

  • kmagee57 Feb 19, 2009

    Changed the electronic flasher and all is back to normal...everything is working now! Thanks

  • Stan Moffett May 11, 2010

    the electronic flasher thata is in the fuse box controls brake lights and more on i know 98 and 99 dodge trucks because when mine went out it was the flasher

  • Stan Moffett May 11, 2010

    i am talking about the fuse panel in the dash on drivers side in the door jamb area

  • Stan Moffett May 11, 2010

    was this an electonic flasher in fuse box that you replaced if it was they are pricey

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 75 Answers

I am glad that it was just the electonic flasher like mine pls rate this solution thanks and have a nice day

Posted on Feb 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why aren't hazard lights or brake lights working?


Brake lights /rear hazard lights not working - Ford Truck ...

www.ford-trucks.com > ... > 1967 - 1972 F-100 & Larger F-Series Trucks
Jul 9, 2010 - After checking the brake lights I tried the emergency flashers and found that they are working in the front but not in the back. I do have rear turn ... 1995 F350 Brake Lights / Turn Signals not working
Jul 9, 2012
Turn Signals and Brake Lights Do Not Work
Mar 10, 2012
Turn Signal, Brake Lights, & Rear Hazard not working
Aug 3, 2010
Rear Turn Signals, Hazards and Brake Lights not working....
Aug 29, 200

Sep 30, 2015 | Cars & Trucks

1 Answer

Why does my turn signal/ hazard light fuse keep blowing out


you have a short in one of the light sockets or a worn wire from the wiring harness. could be the flasher assembly. are the turn signals different bulbs from the brake lights? Does using the brakes blow the fuse? (Rear lights or brake light switch on brake pedal). left or right turn signal blowing the fuse will tell which side has the short. 4 ways only, replace the relay.

May 21, 2015 | 2004 Jeep Grand Cherokee

2 Answers

Turn signals 4 way and brake lights don't work


Replace the hazard flasher and brake switch. No year make or model.

Apr 03, 2015 | Cars & Trucks

2 Answers

2002 chevrolet cavalier, my brake lights, front and rear turn signals and hazard lights are not working


Your Hazard switch is bad. There were a bunch that had faulty soldering connections, and would fail prematurely. This circuit also competes with the turn signals, and the brake lights. Replace the switch with an aftermarket replacement, and it should fix your issue.

Dec 20, 2009 | 2002 Chevrolet Cavalier Coupe

1 Answer

No brake light or hazard warning flashers in rear


It appears to be the mutifunction switch. (Turn signal control). That, plus the 3 words in parenthesis wil come to 699.00 bucks. then we add the switch.... Just kidding. The multi finction switch is defective and about to fail altogether.. Sorry.

Oct 07, 2009 | 1998 Lincoln Town Car

2 Answers

No brake lights, turn signals, or 4-ways.


Did you actually check the bulbs? I believe your brake lights, signal lights, hazards all use the same bulb for each side.

Your brake lights may be your brake switch just above your brake pedal.
The signals could be your electronic flasher module (EFM) located under the dash near the steering column.
Your hazards may be affected by the EFM, but not likely and the switch for your hazards may be faulty

Sep 10, 2009 | 1998 Chevrolet Blazer

1 Answer

Checked all fuses-good, swapped bulbs-good, hazard lights-good, head lights good, turn signals-good but no brake lights. 1995 chevy silverado


Does the turn signals or hazards work in the rear?? Yes... it may be the brake switch or the turn signal switch (power goes from battery, to the brake switch then to the turn signal switch, then to the lights. No? .. again.. possibly turn signal switch or the wiring between cab and bed.

Jun 04, 2009 | 1996 Chevrolet K1500

1 Answer

Both rear turn signal lights flash


I did 15a and electrical for over 30 for chevrolet and seen some pretty weird stuff.To me you still have a ground problem.your idea of checking the brake light switch is a good start.both rear lamps flashing to me means the hazards are shorting across the turn and brake light circuits,because hazards stop flashing when brakes are applied.The brakes light switches in the 90's were really weird because they also incorporated the abs system.Good luck,let me know what happens.Thanks

May 26, 2009 | 1991 GMC C1500

6 Answers

No rear brake light / turn signals on 2001 Chevy Cavalier


The problem is the turn signal/headlight/hazard switch assembly on the steering column which the brake light wiring runs through. The part is easy to change and cost about $50 at most parts stores

Jul 05, 2008 | 2001 Chevrolet Cavalier

Not finding what you are looking for?
Cars & Trucks Logo

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...