An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: wipers on my 95' voyager won't shut off
Lift your hood, look under wipers area on driver side & you should see a wiring connection there, with wires going up under & into wiper motor area below windsheild. Disconnect there, should stop them for now, until yu decide what your going to do about it. Pull it apart when wipers are down out of the way.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Did the wipers stop in the up position? If so it may be a blown fuse or a defective wiper motor. Have you looked at the fuse-box? Did you mean that the wipers swipe the windshield correctly and then when the wipers shut off they stop in the wrong position. If this applies then inspect the wiper transmission. There could be worn/loose linkage between the wiper motor and the wiper arms. Also if the wiper motor was just installed. The clock position may be wrong. Please let me know if this information helps. If not please write back, leave more details, and I'll do my best, good luck.
relay located in the fuse box located under the hood, fuse/relay box is generally on L side of engine compartment.......fan relay should be marked under the cover...testing....try a new relay....they are cheap.
yet use a chrystler part!
Remove the arms,and place them back on where they need to go,do not turn the wipers on,do this as they set now.If the wiper blades when turned on go off the left side of the windshield ,then you will have to remove everything again,and move the wipers down in the rest position,and align everything up to the rest position,with the wipers at rest,and the motor at rest.