- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Replace the turn signal switch. Bad contact inside causing a crossing of the circuits. When the turn signal is applied it should open the brake light circuit allowing for just the signal to work. Doesn't sound like the switch is doing it's job.
Have you checked your brake light fuse? If it is good do your rear turn signals work? If you have turn signal and no brake lights it is probably the turn signal switch these are a common problem and your power for your brake lights goes through your turn signal switch. Sometimes it is actually the hazard switch that melts but this can not be serviced alone. If you have no rear turn signals and no break lights it could still be the turn signal switch but is more likely to be a wiring problem in the rear usually trailer wiring T connections. Chiltons has wiring diagrams in there manuals but they are not always accurate. Let me know if I can help you further and please rate.