Question about 2004 GMC Envoy

1 Answer

2004 GMC Envoy left low beam does not work

How do I get to the bulb to change it?

Posted by on

  • mike loshbough
    mike loshbough May 11, 2010

    this vehicle does not have metal tabs it has two 10mm.bolts the front grill has to be lossend including the plastic crome in front of the lights

  • mike loshbough
    mike loshbough May 11, 2010

    the light assembly has to come out



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • GMC Master
  • 77,202 Answers

Open the hood. The light assembly has two black metal tabs, pull them up. Then the assembly will pull out. On the back of the assembly pull off the top round rubber cap. Reach in and twist out the light with a quarter turn. Disconnect the wire, and connect it to the new bulb. Take care not to touch the bulb as the oils from your fingers will heat up and blow the new bulb. Put the new bulb in the same way the ould one came out lining up the three tabs into the assembly. Give it a quarter turn to secure, place the assembly back into place, push down on the metal tabs,

Posted on Feb 19, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My low beam headlights won't turn on in 2004 gmc envoy

It's the headlamp relay #46. If you want to test it, swap it out with the cooling fan relay #45 and see if your headlights work. If they do you know this is the fix. Found the solution online a couple of years ago and it was spot-on. The part was $45 at autozone at the time.

Aug 12, 2012 | 2004 GMC Envoy

1 Answer

2004 envoy xuv low beams dont work switched fuses 45 and 46 still nothing any ideas

Other possibilities are; the bulbs themselves, burnt or corroded bulb sockets, or a bad headlight selector switch.

Dec 11, 2011 | 2004 GMC Envoy

3 Answers

Checked fuses , relay, dimmer switch in my 2004 GMC envoy, still no low beam headlights. Pleas help:(

If you have checked and discounted the relay, the only things left are the headlight switch and the wiring and to the headlights. Try the switch first. It is not impossible that both bulb's low beam filaments may have fused at the same time, unlikely but not impossibly. (It will not be fuses, unless two fuses blew together).

Apr 07, 2011 | 2004 GMC Envoy

1 Answer

Is there more than one relay switch? I found one for the high beams but not one for the low beams. I changed my dimmer switch and the bulbs but nothing has helped, I have high beams just not low beams and...

The low beam relay is #46 in the underhood fuse panel. check its contact pins before replacing it. If they are corroded, try cleaning them first.

Nov 28, 2010 | 2004 GMC Envoy

1 Answer

Need to replace low beam bulbs in 2004 GMC envoy. Help?

Lift hood, at top of each headlight assembly look for two L-shaped tabs. Pull these tabs straight up, this will release the headlight assembly. Lift assembly forward to gain access to rear of assembly. There two rubber caps, the top one is for access to the low beam and the bottom for the high beam bulbs. Remove the appropriate cap, grasp bulb socket and turn CCW to release. Unplug bulb from socket by releasing catch on side of socket, install new bulb, DO NOT touch bulb glass with fingers. Reverse steps to re-assemble.

Aug 26, 2010 | 2004 GMC Envoy

1 Answer

My lights on my 04 envoy won't work on low beam but will work only on high beam

Its either the switch , relay or the Bulbs(not likely on the bulbs)

Apr 27, 2010 | 2004 GMC Envoy

1 Answer

2004 Envoy low beams will not work. High beams are ok fuses look good.

did you check the bulbs? relay labeled LDM handles both left and right.

Oct 12, 2009 | 2003 GMC Envoy

Not finding what you are looking for?
2004 GMC Envoy Logo

Related Topics:

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts


Level 3 Expert

77201 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides