Question about 1997 Jeep Grand Cherokee

1 Answer

Old owner chopped blower motor wiring - need pinout for resistor

97 jeep grand cherokee limited

The previous owner chopped the blower motor resistor wiring and completely removed the resistor from the system. The person had done it because the old resistor melted and also melted some of the wiring harness. I have no idea what the pinout should be for the resistor. This vehicle has the ATC (automatic temperature control) resistor, not the one in the manual control ones.

Thanks!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,982 Answers

It might be beneficial to you to go to a scrapyard and take a look at one that hasn't been chopped up! You may even want to buy whatever has been removed while you are there!

Posted on Feb 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a wiring diagram for the blower motor on a 1999 jeep grand cherokee limited. I have two wires sticking out of the blower motor and I don't know where they go


Usually you have to splice the wires into the old plug.
You might be able to find a diagram on the websites for auto parts stores such as autozone.

Jul 06, 2012 | 1999 Jeep Grand Cherokee

1 Answer

Blower works intermittently. The cooling is fine...just no push at times for cool air. Blower motor appears to be fine also. Is there a sensor or other that needs replaced? 2002 Jeep Grand Cherokee...


Check where the wires go into the blower housing. There is usually what appears to be a small plate held by 1 or 2 screws that the wires plug into. This is the speed control resistor. If it's going bad, it will cause the problem you describe.

Jun 21, 2011 | 2002 Jeep Grand Cherokee

1 Answer

I replaced the resistor box and 2 green and one blue wire. all i got was a spark no blower and a blown 40 amp fuse help 2000 jeep grand cherokee limited


Either something was mis-wired, or you have a shorted blower motor or a cut in the wire insulation that is shorting to ground. I'm amazed that a 40 Amp fuse is used for the blower motor - that is a lot of current for a motor that size. (13.6 Volts times 40 Amps is 544 Watts for a fan?! There must be some other stuff on that circuit or somebody put in an oversized fuse.)

Jan 15, 2011 | 2000 Jeep Grand Cherokee

1 Answer

Blower motor resistor replacement


how do the wires go on a 2002 jeep grand cherokee blower motor resister.

Oct 18, 2009 | 2002 Jeep Grand Cherokee

1 Answer

Need a wiring diagram for 2002 jeep grand cherokee limited blower motor resistor


Review this links:
- WJ Section 24 Heating Air Conditioning ewj24 (page 32 and next)
- WJ Section 08w Wiring Diagrams ewj8w
* page 19 Index
* page 221 Blower Motor - Diagram 8W-42
- Blower Motor Repair

I hope help you with this (rated this help) Good luck.

Sep 30, 2009 | 2003 Jeep Grand Cherokee

1 Answer

Ac blower won't work. Resistor has been replaced 3 times. I think it is the problem now. Is it easy to replace? Where is it?


Blower motor resistors are found on the pasenger side ducts near the blower motor. It should have three wires going to it.

Apr 22, 2009 | 2000 Jeep Grand Cherokee

3 Answers

2001 Grand Cherokee Limited a/c Blower Motor not working


Try wiggling the connector on your Blower Motor Resistor. They are known for having a bad connection and melting the connector. Check on Ebay, I bought a new harness kit on there. It was easy to install, just cut off the old connector and splice in the new. The colors match so there is no guessing which wire goes where. Only cost me $12 and saved me $300+ that the dealer wanted.

Jul 23, 2008 | 2001 Jeep Grand Cherokee

Not finding what you are looking for?
1997 Jeep Grand Cherokee Logo

366 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...