Question about 1989 Mazda 323

1 Answer

Does anyone know if you need a special tool to get the rotors off a 94 mazda 323?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,902 Answers

No special tool is needed. You just need to remove the bolts holding on the calipper located on the back towards the engine on the A-Arm. Make sure not to loose the rubber gaskets and also make sure that you do not remove the brake line. Once the caliper is out of the way the rotor will baically fall off in your hands

Posted on Feb 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

94 Mazda 323 automatic transmission is stuck in park


Brake switch, check and see if you have brake lights. If you have lights it is the wiring or solenoid at the shifter.

Jun 18, 2016 | 1994 Mazda 323

1 Answer

94 Mazda 323 automatic transmission is stuck in park


First thing to do is check to see if the brake lights work, if they don't there is no power to the park lock out solenoid and the vehicle will not come out of park.

Jun 18, 2016 | 1994 Mazda 323

1 Answer

What is the valve clearance of mazda 323 1.3 engine 94 model


manual adjustment ? then 12th inlet and 15th exhaust will suffice

Mar 12, 2015 | 1994 Mazda 323

1 Answer

What should I do I've tried just about everything


I don't know who has been working on your car,
but I'm guessing all that is being done, is throw
parts at it.

You replace NO Parts until you do some testing &
find a failed part

By then, you most likely found the problem

If that work was done at any number of repair shops,
then they have no idea how to diagnose or test a vehicle.

Apr 01, 2014 | 1994 Mazda 323

1 Answer

Is there a supercharge for 1989 mazda 323 & how do i fit it


I've never seen a supercharger add-on for the 323. There was a 323GTX model for that year that came stock with a turbo and intercooler. If anyone would know about spuerchargers for that year it would be HKS.

Aug 26, 2011 | 1989 Mazda 323

1 Answer

I need to change a stud in my front wheel of my 94 mazda 323 wagon how do i get the hub apart?


Don't attempt to pull the hub apart. remove the caliper, and the brake rotor, and this should provide enough space to pound the old stud out, and pull a new one through. Some dust shield bending may be required! Some vehicles even have bend outs stamped into the dust shield for access. Consult a good manual. Contact me with any questions and good luck!

Jun 25, 2011 | Mazda 323 Cars & Trucks

1 Answer

I want to change the brake pad and the rotor of my 1989 mazda 323 but i have a difficult time puliing out the rotor, is there a special tools to use to take out the rotor or how to take it out .


Most of these models are a floating rotor that will just require a few hits with a soft face hammer or rubber mallet to loosen.If it is the fixed one.It is secured by 4 bolts usually at the rear of hub.You will need to remove the hub from the stub axle to access the rotor.Often you will need to split the hub in two around the bearing.Let me know if it is the latter type and I may be able to walk you through it here.I hope this helps you toward solution,or don't hesitate to respond with some more information.

Apr 01, 2011 | Mazda 323 Cars & Trucks

1 Answer

I am looking for a mazda 323 carburetor for sale


A 94 mazda dosn't have a carburetor, it has fuel injection.

Feb 22, 2010 | 1994 Mazda 323

1 Answer

Won't start,was told timing chain was broken but not sure


I HAVE THE SAME CAR! ...and same problem.... After 4 days of jerking around.... I found the problem...
1) pull off the distributor cap... --- hang it AWAY from the distributor
2) get in the car and KICK IT OVER....
3) If the distributor base does not turn, you have a bad timing belt
(NOT A PROBLEM, cause it is a non-interference motor -- CONSIDER YOURself lucky!)
4) if it does turn, most likely it is the IGNITOR (or ignition control module) -- $90 at Checkers....

GOD BLESS ....
911 was an inside JOB
Death to the New World Order...

Dec 28, 2008 | 1994 Mazda 323

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...