- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I would start off with some WD 40 on the gate button and check the wires for corsion or bare wires touching, with the gate open the dome light comes on. Worst comes to worst get a new or used button at a junk yard.
Replace the gate latch. Open the gate, remove the top panel first, it pops off. Remove the bottom, 2 to 4 screws to remove, then it pops off. This gives you access to remove the latch.
Is there perhaps a problem with the dome light switch on the lift gate? Close all the doors, open only the lift gate and find the switch on the lift gate frame (usually a rubber covered "bump") and press it in. You might have a loose wire shorting against the bodywork or the door is not depressing the switch properly.
your rear glass on your tail gate is ajar ..press the round circle button on the gate from the outside and the glass will pop open at yah close the glass a little harder since the latch is a bugger to catch i get this all time with mine
and your rear access msg will disappear and your rear windshild motor may work since the glass isnt fully closed the wiper wont run
first you have to check power to window motor could be switch or motor and explain me more about blower is work only on high speed or not at all and also tail gate is wont open auto or manualy?let me know
×