Question about 2002 Suzuki Aerio

Open Question

How to replace number plate bulb on rear of Hyundai Getz.

Posted by on

  • Anonymous Feb 23, 2009

    I have the same problem. I want to change the bulb on my mother-in-law's car but it seems inaccessible unless I strip the inside panel.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i programme my new remote key on hyundai getz 1.6 cdx


at the dealership, they have a programmer (human or machine) that can do what you ask.

Feb 03, 2015 | Hyundai Cars & Trucks

1 Answer

How to change stop light globe on 2008 hyundai getz


Remove the two 10 mm (head) bolts that hold the stop light. This bolts are between the tail light assembly and the tail gate weatherstrip. You can see them without having to remove anything.

By using a masking tape wrapped flat screwdriver, pry "back" the whole tail light assembly. Once out, you can twist the brake light (or reverse, or turn signal) bulb plug, remove and replace the bulb.

The Getz uses standard two filament brake globes (1/4 turn to install).

May 12, 2014 | 2008 Hyundai Getz 1.6

1 Answer

Getz 1.5 engine light on after replacing glow plug not starting now


Check wiring on glowplugs . Check connector plate is not short-circuit on head .

Mar 18, 2013 | 2005 Hyundai Getz 1.5

1 Answer

How to replace rear brake light hyundai getz 2004


Access to the tail light cluster should be through panels in the rear corners of the vehicle. Remove the panel and you can remove the tail light cluster to replace the bulbs. This is the position on most sedans, unless, like on pick-ups, the tail light lenses have screws which allow the lenses to be removed to change the bulbs.

May 15, 2011 | Hyundai Motor 2004 Accent

1 Answer

High Level Brake bulb replacement


If memory serves, there are two screws holding this light assy to the rear package deck. They are covered (LH and RH side of this assy). remove the covers and using a phillips screwdriver, remove the screws and lift the assy up and away from the rear glass. you now have access to the bulb and socket.

May 18, 2009 | Hyundai Motor 2004 Accent

2 Answers

Need to fix lights on number plate on 1.3 3dr gl


hi from uk the number plate lights x2 are on same fuse as side+tail lights so if n/plate is not lit ?more likely bulbs have blown ? to access remove the panel from boot lid (clips+screws) then you will see rear of n/plate lights the bulb holders twist anti clock slightly and pull out replace bulbs with same type 5watt check all work b4 refitting panel

Feb 05, 2009 | 1999 Hyundai Accent

1 Answer

Brake Light


hi from uk to change the brake light bulb/s on the getz is easy just open rear hatch then you will see 3x pozi drive screws alongside each lamp assy that screw /secure the lamp to body at the lower endof drain channel? remove screws and lift away lamp from body each bulb is accessable then now would be a good opportunity to clean the area at rear of lamp ? then reassemble is reverse as above my wife has one of these cars and has been absalutely trouble free for past 5yrs but it does get lots of tlc/servicing by myself hope the instructions are ok to follow?

Nov 23, 2008 | Hyundai Motor 2003 Elantra

1 Answer

Hyundai getz


if the speedo still works then it will need a spedo unit if the speedo doesn't work it is either the cable or the gear in the trans to check the cable unthread from trans and attach a drill to the cable innereds spin the drill if the speedo does not move replace the speedo cable

Aug 28, 2008 | 2002 Hyundai Accent

Not finding what you are looking for?
2002 Suzuki Aerio Logo

Related Topics:

496 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...