a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
hi to remove the hob nut you need a large bar about two feet long and i think they are 30mm but you will need to replace them with new ones and torque them correctly or you will encounter problems theyalso have to be pinned when torqued it really is not a diy job
i would put the car on car ramps and put a brick or something behind the back wheels for security and then you will need an screwdriver or a socket to remove the clamp and normal you use the same one on the top normal socket size is 5/16 or 1/4.
there are 4 large wires at the front of the engine on the cylinder head, carefully remove them by twisting the rubber boots back and forth until they come off, under those are the spark plugs, u will need a 3/8" ratchet and a short socket extension with a 5/8" spark plug socket on it, put the socket over the plugs and remove them reinstall in reverse order, 10 minute job on an escort.
this comes a a hub assembly
you need to remove the brakes and brake rotor
the center nut holding in your CV shaft
in the hub you will find holes that you can put your socket threw to remove the mounting bolts.