98 lexus ls 400 engine light on misfire bank one what can i do

SOURCE: codes:p1346/p1349/p1354/p0446/p0300/p0301/p0303/p0305/p0307/ p0430/car runs rough

P0301 Cylinder No. 1 Misfire Detected
P0302 Cylinder No. 2 Misfire Detected
P0303 Cylinder No. 3 Misfire Detected
P0304 Cylinder No. 4 Misfire Detected
P0305 Cylinder No. 5 Misfire Detected
P0306 Cylinder No. 6 Misfire Detected
P1346 Variable Valve Timing (VVT) Circuit Range/Performance Fault
P1349 Variable Valve Timing (VVT) System Malfunction
P0330 Knock Sensor
P0446 EVAP Vent Control Fault
P0430 Catalyst System

Stop driving immediately.....

You defiantly skipped on your timing........

SOURCE: The VSC and check engine light is on in my 2000

P1349 - VVT System Malfunction Bank 1

Most likely for this issue you will need to take it to the dealer.

SOURCE: 1994 lexus ls 400 problem with dash board light

Try rotating the ignition switch slightly after you turn it to on and see if the lights come on...had the same problem and changed the switch fixed the problem...

Mike Vincent

• 358 Answers
• Posted on May 27, 2009

SOURCE: 92 lexus ls 400 check engine and traction control light came on at the same time, 92 lexus ls 400.

the track off light will come everytime yhe check engine light comes on. this is normal. you need to have the check engine light checked first.you can go to your local parts house they will scan it for so you at least see what area you problem is in and then you can start from there. let me know lf you find out youe engine codes.

SOURCE: Fuse Box ( cover) diagram for a 95 Lexus LS 400 is missing.

check the wiring harness beside the hinge that moves when you close the trunk.i have seen the wiring get pinched and the ground gets broken. the tail lights have separate left and right side fuses.get a test light,and with the ignition in the on position,there should be power on both sides of all the fuses.the atc type have little test pins on them.ground the test light and put the tip on the fuse.if there is power,the light will come on. if a fuse does not light up the light on both sides,it is open.since the fuses are see thru,it is apparent if it is blown as the metal inside will be burnt.