SOURCE: how to change the serpentine belt on a lumina euro 3.1??
I found on my 92 lumina 3.1 the easiest way to change the belt is to have two people handy (you and a helper) push the belt tensioner (which is more in the middle of the belt system, its the only thing that has give when pressure is applied) down (which will loosen the belt) have your partner slip the belt off the altenator (which should be on the very top of the belt system on the passenger side) and just pay attention to the way the belt is routed as you remove it, put the new one on (routed correctly) push the tensioner again have your partner slip it back over the altenator....and you have a new belt on with no tools :)
just pay good attention to the routing of the belt, and i also think there is a black cover over the belt which needs to be removed before the old belt can be taken off (if you dont see it at first you will find it) it has 3 bolts i think and also a diagram of the routing....
TIP: the tensioner will take some muscle to move down, and yes the belt is running over it....
SOURCE: need Rear Brake Diagram for 1994 Chevy K2500 4x4
Here is the diagram,It is always a good idea to only disaasemble one side so you can use the other side as a reference,I also reccomend using a set od brake pliers,they will the disassembly and reassembly much easier.
SOURCE: need diagram for serpentine belt for 2004 chev
For an 2004
CHEVROLET IMPALA - V6 3.8L 231ci GAS FI N K
Belt Routing Diagram Multiple Accesories
I dont know if this is your model engine, so, in DAYCO Catalog you can find other engine too.
I hope help you with this. Good luck ( remember rated this help).
SOURCE: Serpentine Belt Diagrams for 2000 chev silverdo v8
Here's the serpentine belt diagram you asked for...
SOURCE: diagram for insataling serpentine belt on 2004
Hi!!
Here is a belt routing diagram for your 2004 chevy Aveo.
105 views
Usually answered in minutes!
×