Question about 1993 Toyota Previa

1 Answer

Very dificult to start

I have a toyota previa 93 and is very dificlt to start. A friend told me to changfe the fuel filter, but in vain. I wold like to know if you can help me

Posted by on

  • 1 more comment 
  • prjorgerodri Mar 03, 2009

    Unfortunately I still have the problem with my starting. I would like to know what are the symptoms of fuel pomp failure. Probably is the fuel pump. Also my speedometre it does not work well. Sometimes I go at 45M/h (aprox) and the speedometre is marking around 15M/h if you can help me I would apreciate.\r\n
    Thanks, Jorge

  • prjorgerodri Mar 05, 2009

    My Toyota Previa 93 is auto, petrol and the speedo is not electrical

  • Derryconbill May 11, 2010

    Is the car diesel? If so will it start when warm, If yes probably engine heaters

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

I would change fuel filter any way only £6 delivered on ebay then i would start looking at glow plugs and relays first check to make sure glow plugs are getting a live feed bad side glow plugs are located under drivers seat side of engine so not easy to get at unless you remove seat carpet and engine covers

Posted on Feb 27, 2009

  • skadney Mar 03, 2009

    I need to know more about your car is it petrol or diesel the speedo is electric, normal fuel pump failure car wont start at all. i have at other times noticed fuel tanks dont vent properly and cause a vacuum so you get fuel starvation try taking fuel filler cap off. other questions does car idle ok and rev. is problem only starting vehicle and when engine is under load. also is car manual or auto

  • skadney Mar 06, 2009

    sorry thought it would be the same as *** import(estima and lucida) they have electric speedos.

    when car does start is it on all four cylinders

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

The compression is the same for all cylinders(150), but when I turned motor over, water came out of #1 cylinder only. Any idea?


Sounds like a head gasket leaking water in from the cooling system. Does it run OK? Any water in the oil on the dipstick and a mayonnaise type film on the oil filler cap?

Jan 21, 2016 | 1992 Toyota Previa

1 Answer

1991 toyota previa van won't start sometimes and cuts off by it self sometimes was told not the fuel pump but the computer.What kind of computer needs to be replace to fix that?


probably the main one. did you try the map sensor. my dad had one that he spent alot of money on and come to find out it was a $26 map sensor that plugs in on top of the motor.

Jan 20, 2013 | 1991 Toyota Previa

1 Answer

I dont know why my 93 previa wont run anymore, it cranks and wants to start but fails, i dont know if i need new spark plugs or its the fuel pump. it has 250,995 miles on it. the only problem i had with is...


The high idle is affects it ability to start up, but the main problem is the fuel pump ,to deliver proper fuel to start the vehicle up, the previa is also equipt with a cold start injector, try this cycle the ignition but just dont start we will let it build pressure, cylcle it and do you hear the humming noise thats the fuel pump, cycle it again, now crank it hopefully this helps

Apr 27, 2011 | Toyota Previa Cars & Trucks

2 Answers

Too much presseur in the gas line, and leeks out.Toyota previa 93.


CHANGE THE PRESSURE REGULATOR TO THE FUEL PUMP,AT THE HARNESS UNDER THE HOOD NEXT TO THE BATTERY

Mar 11, 2011 | 1993 Toyota Previa

1 Answer

Noise coming right front wheel. I assume that it is the wheel bearing. My question is: are there an inner -AND- outer bearing. Also, how dificult are they to replace. 1993 Toyota Previa front disc brakes....


whole assembly has to be changed, the bearing is one non-dissasemblable unit, it has to be pressed out and in. best done by someone who has the right tools.

Jun 30, 2010 | 1993 Toyota Previa

1 Answer

1994 toyota previa idles rough and cuts off only when it has been running for a while"


Change fuel filter, air filter and if that doesnt help check fuel pump pressure.

May 25, 2010 | 1994 Toyota Previa

1 Answer

92 toyota previa fuel filter location


go to the rear of the van try to locate the fuel lines under it follow them until you get to a large round cylider that should be it

Apr 09, 2009 | 1992 Toyota Previa

Not finding what you are looking for?
1993 Toyota Previa Logo

349 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

64286 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...