Question about 2000 Ford Excursion

1 Answer

Where is the fuel pump relay on 2000 excursion

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 20 Answers

The fuel pump kill switch is behind the passenger kick panel.
The Relay is 202 in the Power Distribution Box under the hood.
Fuse is located at 112 in the PDB.

Posted on Feb 24, 2009

6 Suggested Answers

  • 1 Answer

SOURCE: how to change fuel filter 2000 excursion

Yes it is the tool for fuel lines and ac lines. Your local autoparts store should have them, they are universal. You need to use the small end for the fuel filter.

Posted on Jun 02, 2009

mcgyver468
  • 710 Answers

SOURCE: fuel gauge bouncing on 2000 chevy tahoe where is fuel pump relay

fuel sending unit is in the tank. this is normal after about 75k miles and up. pump and sending unit are sold together. fuel sloshes from front to rear making the float on the sender rise and fall.

Posted on Apr 21, 2009

  • 1071 Answers

SOURCE: 2000 kia sportage pump is working relays have been

there is a splice for fuel injectors at the front of the fuel rail conduit and electric tape will need to be removed to see if it is ok then clean up all engine grounds and ecm grounds on passenger side kick panel if this doesnt help check coils and crank sensor

Posted on Jul 22, 2009

  • 88 Answers

SOURCE: fuel pump relay for 2000 mitsubishi mirage

most newer veichles your feul pumps in your gas tank

Posted on Aug 22, 2009

derek82
  • 58 Answers

SOURCE: where is fuel pump relay on 2000 ford excursion

th should be in the fuse box inder the hood. the inside of the cover should tell you which relay it is.

Posted on Oct 28, 2009

ZJLimited
  • 17970 Answers

SOURCE: 2000 Malibu Starts then looses

Keep in mind that you have several components there:
- Fuel Pump Sender Assembly,
- Fuel Pressure Regulator,
- Fuel Rail Assembly, and
- Fuel Injectors.

1.- Fuel Pump (Sender Assembly) - TESTING
Refer to the accompanying charts for fuel pump diagnosis and testing.

The fuel injection system remains under pressure, even after the engine has been turned OFF. The fuel system pressure must be relieved before disconnecting any fuel lines. Failure to do so may result in fire and/or personal injury.

eb744a2.jpg

Fig. 3.1L engine OBD system check to be done before fuel pump relay circuit diagnosis


26456ba.jpg

Fig. 3.1L engine fuel pump relay circuit diagnosis (1 of 2)


b3b739d.jpg

Fig. 3.1L engine fuel pump relay circuit diagnosis (2 of 2)


db78a73.jpg

Fig. View of the fuel pressure test port (Schrader valve)-3.1L engine

A - 3.1L engine fuel system pressure test (1 of 4)
B - 3.1L engine fuel system pressure test (2 of 4)
C - 3.1L engine fuel system pressure test (3 of 4)
D - 3.1L engine fuel system pressure test (4 of 4)

c8a9798.jpg

Fig. The fuel pump/fuel sender module assembly is mounted in the fuel tank


2.-
Fuel Pressure Regulator - REMOVAL & INSTALLATION

(the fuel pressure regulator, which is located on the fuel rail assembly)

NOTE:
Before removing the fuel regulator assembly, place a clean shop towel under the regulator to catch any fuel drips

  1. Properly relieve the fuel system pressure.
  2. If not done already, disconnect the negative battery cable.
  3. On the 3.1L engine, remove the intake manifold plenum, as outlined in .
  4. On the 2.4L engine, remove the fuel rail. Refer to procedure earlier in this section.
  5. Detach the vacuum line from the regulator.
  6. Place a shop towel under the regulator to catch any fuel that may drip out. Unfasten the fuel pressure regulator retaining screw, then remove the regulator by twisting and pulling it from the fuel rail.
  7. Remove and discard the O-ring seal. Inspect the filter screen for contamination and replace if necessary.
To install:
  1. Prior to assembling the pressure regulator to the fuel rail, lubricate the new rail-to-regulator O-ring seal with clean engine oil.
  2. Place the O-ring on the pressure regulator and install the pressure regulator to the fuel rail.
  3. Install the retainer or coat the regulator mounting screws with an approved thread locking compound and secure the pressure regulator in place. Tighten the mounting screw to 76 inch lbs. (8.5 Nm).
  4. If removed, install the fuel rail assembly to the engine.
WARNING The fuel return pipe must be connected before tightening the regulator retaining screw to prevent the regulator from rotating. Rotation of the regulator could damage the retainer and spacer bracket and lead to a fuel leak at the regulator inlet.
  1. Connect the fuel feed line and return line to the fuel rail assembly, use a backup wrench on the fittings to prevent turning.
  2. Attach the vacuum line to the regulator.
  3. On the 3.1L engine, install the intake manifold plenum.
  4. Connect the negative battery cable. Turn the ignition to the ON position for two seconds, then turn it to the OFF position for ten seconds. Turn again to the ON position and check for fuel leaks.

continue...

Posted on May 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Install fuel pump relay


the Fuel Pump Relay is located behind the radio. The radio has to come out to access it.
what a place to mount the relay for an engineering team with the right mind !!?
RADIO REMOVAL HERE

Feb 11, 2014 | 2000 Ford Excursion

1 Answer

Where is the fuel pump relay on 2000 excursion v10


the Fuel Pump Relay is located behind the radio. The radio has to come out to access it.
what a place to mount the relay for an engineering team with the right mind !!?
RADIO REMOVAL HERE

Feb 16, 2012 | 2000 Ford Excursion

1 Answer

Ran out of gas... 2001 ford excursion will not start.... no pressure at pressure valve... help?


NOTE: Chk all relays and circuitry before pinpointing a fuel pump failure!! Running out of fuel may have burnt the fuel pump out. The fuel pump runs constantly when the engine is fired or cranked, it also utilizes fuel to keep the fuel pump from heating up. W/O fuel, the pump runs and heats up quickly and usually fails!!hopefully this helps!!

Sep 16, 2010 | 2001 Ford Excursion

1 Answer

How do you install fuel pump on 2000 excursion?


Almost all vehicles require removing the fuel tank,then remove the fuel pump and sending unit assy, from the top of tank. Most assy's allow you to just replace the pump, and keep the sending unit assy.
That will be your case.

Sep 15, 2010 | 2001 Ford Excursion

1 Answer

Fuel pump location


It is located in the fuel tank.

Jun 04, 2010 | 2000 Ford Excursion

2 Answers

Where is the fuel pump relay located on a 2000 excursion. just installed a new engine and cant get pump to activate.No owners manual either. thank


The fuel pump relay is located either in the fuse/relay center in the engine compartment (relay #112 .Which is 20A Maxi fuse) .
Or behind the.radio in the center of the instrument panel.

Mar 13, 2010 | 2000 Ford Excursion

1 Answer

Where is fuel pump relay on 2000 ford excursion


th should be in the fuse box inder the hood. the inside of the cover should tell you which relay it is.

Oct 28, 2009 | 2000 Ford Excursion

4 Answers

Excursion won't start. Engine turns over.


Will turn over but will not start

Oct 22, 2009 | 2000 Ford Excursion

1 Answer

My Excursion stopped several times on freeway


If your Excursion has the 7.3L Diesel, what I first suspect is the Ford recalled item Cam Position Sensor (CMP sensor). If your nearby Ford dealership has not replaced it for free for you, then make an appointment and take the car in to have the sensor replaced. If this does not solve your stalling problem, come back to FixYa and I will assist you further.

Apr 06, 2009 | 2000 Ford Excursion

Not finding what you are looking for?
2000 Ford Excursion Logo

1,140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...