Question about 2006 Jeep Commander

1 Answer

The engine won't start

.Everytime I try to start the engine it won't start everything that' got to do with power turns on.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,982 Answers

First, check your battery for proper voltage. Check with key off, key on and with key turned to start position.In start, voltage should not drop below 10.5. You did not mention if engine turns but does not start, what you hear or don't hear etc. With key turned to start, there should be 12v at the small terminal on the starter. Large wire on starter should have 12v all the time. Also check for good ground at block.
There's a lot more to this but if you do this, you're going in the right direction.

Posted on Feb 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why won't it run


have you checked the relay between the battery and the starter?
i had a ltd 2 that suddenly refused to start after trying everything else it turned out to be a little black box(relay) on the fender well between battery and everything else!

May 08, 2013 | Cars & Trucks

1 Answer

2008 escape hybrid won't start when you turn the


I am not familiar with hybrids, but i think when you start, it's starting with the battery, so I think you have a bad connection, check and clean the battery terminals.

Mar 25, 2013 | Cars & Trucks

1 Answer

Won't start. key works in aux position but not when turned all the way


If you have power in aux position(ex.)radio works but doesn't when you put the key in the start position,the ignition switch is bad,the contacts are warn out for starting/cranking&run positions,these are used everytime you start your car,but auxillary is ony used once in awhile(ex.)your sitting listening to music while waiting for someone to come,but if you do have radio in the run position,but no cranking/starting you could have a blown resistor on fire wall or fuse for ignition,or the starter has called it quits,good luck I don't know if the starter is clicking rapid or just one click or just no power not cranking or cranking a better description of everything that happens will make this alot easier

Dec 29, 2012 | 2000 Dodge Grand Caravan

1 Answer

My 2000 Cougar will not start. Everything is getting power but when I turn over the engine I get nothing. No clicking and it won't turn over. Any suggestions?


I replace one of the blue 20amp fuse under the hood number 40 or 41.... Then mine started but, now the car is not running like it should... The motor runs ruff and sounds like it has a tap in the motor... Hope this helped

Sep 30, 2012 | 2000 Mercury Cougar

1 Answer

My1999 kia sportage won't start yet everything still works


check if there is a power going to your starter motor or check the alarm ?

May 23, 2012 | 1999 Kia Sportage

1 Answer

Replaced battery on my 2006 Ford Escape. Still won't start but everything else works


Figure by everything else you mean the radio,lights,etc? Is the engine turning over? What happens when the key is fully engaged? If the engine does not turn over the first place to look would be your fuses. Ensure that none look to be burnt or blown.If so replace and try again.If fuses look good Next step would be to ensure starter connection is good and starter is turning over.If the starter is not turning over then I would focus on it.Hope this helps.

Apr 15, 2012 | Cars & Trucks

1 Answer

When trying to start my 1999 GMC Jimmy I turn the egnition and all my aux. lights turn on and everything works, but there is no power going to my starter, it doesn't make the clicking sound and it...


check for power to starter solinoid, if power to there. then it has to be a bad starter solinoid or starter. checker solinoid first. if bad you will not hear any clicks or anything.

Sep 11, 2011 | 1999 GMC Jimmy

1 Answer

I have a 98 plymouth. recently there was a storm and someone deciced to go through a wash and it stalled. so maybe a week later i try and start it and seems to want to turn on but it dosen't also the brake...


If the noise you hear when attempting to start the engine is a clicking noise, that is just the started relay trying to send battery power to the starter motor.
First check that your belts are in place. It may be that excessive water has unmounted them. The belts connect everything - alternator to battery, drive power, water pump, everything. If someone washed the engine deliberately to clean the mud, anything could be discontected, including electrical wiring. Hope that did not happen.

Aug 07, 2010 | 1998 Plymouth Voyager

1 Answer

Radio, dome lights and EVIC power problem


I found a paritally blown fuse. When the fuse blew metal pieces ended up partially making contact. After replacing the fuse everything worked great.

Jan 07, 2009 | 1994 Jeep Grand Cherokee

Not finding what you are looking for?
2006 Jeep Commander Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...