Question about 1994 Chevrolet C1500

1 Answer

How do you set the timing on a 1994 Chevy Silverado 1/2 ton 4x4?

Posted by on

  • jims3 Mar 04, 2009

    This worked!!! Truck is running just fine. Thanks!

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 137 Answers

On the fire wall pass side or under the heater box along the carpet on the pass side there is a single wire connector you disconnect that.. is the spout timing connector .. that wil put the engine at base timing .. use timing light to see timing and turn the distributor after its loostened if nescessary to adjust it then retughten and turn off engine then reconnect the spout connector you disconnected earlier.. restart and it will be all set the code generated during the disconnection of the spout will not keep the engine light on once its been reconnected and engine restarted....

Posted on Feb 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 94 chevy Silverado 5.7l with 4l60 transmission will a 97 chevy Silverado 4l60 work even if the speed sender is on different side and made different on transmission


Chevrolet / GMC / GEO Transmission Look Up Table

www.autorepairmanuals.biz/page/372807
Blazer, 1993-, 4L60-E. Blazer, 1994 - Up, 6.5L V8 Turbo Diesel, 4L80-E. BLAZER/TRAIL BLAZER/JIMMY, 1995-2003, 4 SP RWD/4X4, L4 2.2L L6 4.2L V6 4.3L ...

Transmission Applications - GM Automatic Transmissions

www.gmautomatictransmissions.com/transmission_applications.php
Avalanche, 2001-06, V8 5.3L 5.7L 6.0L, 4 Spd RWD/4X4, 4L60E. Avalanche, 2004-06... Camaro, 1994-05, V6 3.4L 3.8L, 4 Spd RWD, 4L60E. Camaro .... Monte Carlo, 1997-05, V6 3.8L (W/S.C.), 4 Spd FWD, 4T65E. Monte Carlo ... Silverado, Sierra,1500-3500, 1995-06, V8 4.8L 5.0L 5.3L, 4 Spd RWD/4X4, 4L60E. Silverado ...

4L60E Transmission Rebuilt ' eBay


Dec 27, 2015 | Cars & Trucks

1 Answer

Is my 1995 GMC Sonoma 4x4 a half ton truck


small trucks like that are considered 1/4 ton. silverado 1500 1/2 ton an silverado 2500 3/4 and up. same goes for gmc

Apr 06, 2013 | 1995 GMC Sonoma

1 Answer

Need a diagram of 1999 chevy 1/2 ton 4x4 rear brake brackets


Go to you nearest auto part. Store. They will print one up for you or when you get the kit it will diagram with it

Mar 06, 2013 | 1994 Chevrolet K1500

1 Answer

How much oil do you use in a 2000 chevy silverado 1/2 ton 4x4 rear axil


Depends on the rear axle size it is anywhere from 2, to almost 3 qts rule of thumb is it will start coming out the fill hole slightly when full also be sure to add a bottle of posi additive and use synthetic oil

Jul 24, 2010 | 2000 Chevrolet Silverado 1500

1 Answer

I have a '97 Chevy 1/2 ton 4x4 PU. Very good


Sounds like a loose connection, Clean the fuse contacts. Sometimes lubricant and dirt gets on the contacts within the switch itself and this will interfere with power supply. Have you checked the wiper relay corrosion and wear on the relay contacts impair electrical connection. Brighten up contacts with fine sand paper and if the relay contacts are suspect, remove the cover and draw folded sand paper between the contacts until clean.

May 13, 2010 | 1994 Lincoln Town Car

1 Answer

Chevy silverado keeps blowing fuses


Your 20 amp fuse will not blow if glowplug wire shorts. each plug draws 15 amps which is 120 amps total.I think there are in line fuses for them. Try to wring out where each output from the fuse goes, disconnect all and reconnect one at a time till it blows.That should point to your problem process of illumination! Good Luck!!

Aug 25, 2017 | 1994 Chevrolet K1500

2 Answers

Need Rear Brake Diagram for 1994 Chevy K2500 4x4


Here is the diagram,It is always a good idea to only disaasemble one side so you can use the other side as a reference,I also reccomend using a set od brake pliers,they will the disassembly and reassembly much easier.
0900c1528008f6a2.gif

May 30, 2009 | 1994 Chevrolet K2500

Not finding what you are looking for?
1994 Chevrolet C1500 Logo

535 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77201 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...