Question about 1986 Plymouth Reliant 4 Door

1 Answer

How do you remove a starter on a 1986 plymouth reliant k? where is it exactly and what is the easiest way to get to it?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 137 Answers

Its behind the engine the bolts that hold it in are located in the bellhousing.. depending on the style of engine you have there was a split in that year you may have just two or three bolts through the transmission that hold the starter in or just two bolts and one nut on a stud that you get from the starter side.. also ther is a hanger/ support bolt and bracket on the back of it that can be remove most easily from under the car..

Posted on Feb 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake booster problems plymouth reliant


Did you replace the master cylinder too ?
What was the problem with the old booster ?

Jul 29, 2012 | 1986 Plymouth Reliant 4 Door

1 Answer

1986 plymouth reliant has fire but will not start. What can I do?


Does it have fuel, does it have the correct valve timing?

Jul 19, 2012 | 1986 Plymouth Reliant 4 Door

1 Answer

Correct timing for a 1983 plymouth reliant


7 degrees before top dead center if you got the mitsubishi 2.6 and either 10 or 12 btdc on the 2.2 double check you vehicle manual to be exact

May 05, 2010 | 1983 Plymouth Reliant

1 Answer

88 reliant starts and runs fine surges when driving on the highway


NOT MUCH INFO TO GO ON... THEY HAVE A PROBLEM WITH THE CAM/ CRANK SENSOR.. TAKE DISTRIBUTOR CAP OFF.. REMOVE BUTTON, REMOVE THE COVER THAT COVERS THE INTERNALL GUTS OF DISTRIBUTOR... YOU WILL SEE A FLAT ROUND PEICE THERE THAT HAS A COUPLE WIRES GOING TO IT.. TRY REPLACING IT.. IT IS LIKE THE PICK UP IN A NORMAL SYSTEM

Nov 29, 2009 | 1986 Plymouth Reliant 4 Door

1 Answer

My 1986 plymouth reliant car runs very rough, I was told a map center well solve the problem? Is that correct?


the MAP or Manifold Absolute Pressure sensor is just one of the components that send signals to the on-board computer.fault codes are stored and can be 'read' with a diagnostic tool.or by using a key on, key off sequence described in detail in a repair manual.

Oct 08, 2009 | 1986 Plymouth Reliant 4 Door

1 Answer

Changing the Fuel Filter on a 1988 Plymouth Reliant


MAKE SURE KEY IS OFF USE A BUCKET AND TAKE OFF LINES TO THE FILTER YOU WILL LEAK SOME THEN REVERCE THE SAME WAY BACK BUT MAKE SURE THE ARROW IS POINTED TOWARD THE ENGINE ON THE FILTER

Jul 27, 2009 | 1986 Plymouth Reliant 4 Door

1 Answer

Engine Races


sounds like a faulty idle speed sensor

Apr 11, 2009 | 1986 Plymouth Reliant 4 Door

1 Answer

I have a 1986 Plymouth Reliant, 2.5 (engine)


Auto Zone has an online manual showing how to do the timing belt here, and for the drive belts here (about halfway down the page).

Feb 09, 2009 | 1986 Plymouth Reliant 4 Door

1 Answer

'86 Plymouth Relient. How do I remove the starter?


two bolts that run through tranny housing & one bolt coming from under starter going into tranny housing, slid and wiggle it out from topside

Jul 31, 2008 | 1987 Plymouth Reliant

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...