Question about 1997 Ford Escort

1 Answer

Cruise control does not function

When i press on button,cruise control will not work. the cc indicator on dash won't turn on. need to know where fuse is located.

Posted by on

  • 1 more comment 
  • Anonymous Mar 26, 2014

    Can not locate fuse or determine what is wrong

  • Anonymous Mar 26, 2014

    cruise control does not come on

  • Anonymous Mar 30, 2014

    Is there a fuse for the cruise control on this vehicle? If so where?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 21,990 Answers

Cruise on a ford escort?? not fitted to europeon model thats for sure.All fuses are in the fuse box above left knee ,unhook the fuse box and let it drop to get at relays.

Posted on Feb 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My cruise control on my 2001 Kia Sportage stopped working.


Check your repair manual where the vacuum hoses for the cruise controls are (engine bay). Maybe one of the hoses came off or has a leak.

Feb 29, 2016 | 2001 Kia Sportage

1 Answer

2007 Caravan SXT..Cruise quit functioning..Press cruise and the green cruise light comes on in the dash but flickers..Any ideas appreciated. Horn does work. No obvious brakelight issues.


Look on the panel that covered the fuse box that you removed to get to the fuses. There will be a picture with corresponding numbers to as to which fuse controls what and what number it is.
Does that help out ?

Apr 26, 2015 | 2007 Dodge Grand Caravan SXT Minivan

1 Answer

Which fuse is for cruise control in 2003 ford f150


The fuses for the speed control from the factory are :
Engine Compartment fuse panel #7,
Cab fuse panel Fuses #15, #13, #5

The fuse that goes to the recall part is Fuse #13, 20A

The recall is 05S28. Description: Speed Control Deactivation Switch.
The part number for the recall is : 1L1Z-9F924-AA
The part has a fuse inline that is marked as non serviceable, but 1 revision I saw, it was just an ATM fuse under tape. Not sure if this is the final revision that was used on your truck ( or should have been used ).


The self test for the Cruise Control ( for 00-03 MY, with the CC light on the cluster ) :

With the key off depress and hold the cruise control off button while turning the ignition to the run position,don't start the truck, the cruise light will flash once to let you know it is in self test.
Five additional flashes indicate a bad cruise control servo

Release the cruise off switch and within 5 seconds depress the other switches in sequence:
1. on
2. resume
3. coast
4. set/ accel
The speed control light will flash as each switch is depressed.

If the last one does not flash it may then flash a code

After this the cruise will move the throttle to test the actuator and the cable.
Make sure the throttle returns to idle and turn the key off.
----------------------

Self-Test Diagnostics

WARNING:
This test is a key on engine off (KOEO) test only that is conducted in park only with emergency brake fully engaged.

1. Enter self-test diagnostics by depressing the speed control OFF switch while turning the ignition key ON, making sure the engine does not start and is not running. The speed control indicator on the instrument panel will flash once to indicate that speed control module entered the diagnostic mode. Five additional flashes at this point indicate a defective speed control servo. Release the OFF switch.

2. Press the remaining switches in this sequence: ON, RESUME, COAST and SET/ACCEL.

If the ON switch is not depressed within five seconds after entering the diagnostics mode, the module times out and the procedure must be started over.

The speed control indicator lamp will flash as each switch is depressed. Press each switch in the sequence immediately after the indicator light goes out for the previous switch.

Note:
There will be a slight delay when the last button is pressed and the lamp flashes.

3. A lamp flash with the last button (SET/ACCEL) indicates that the static test passed. If the lamp does not flash with the last button and there are no additional flashes of the lamp, the switch is defective.

If the lamp does not flash with the last button, and additional flashes occur, follow the chart below for trouble codes:

- 2 flashes - BPP defective, circuit is defective, brake applied, CPP switch or jumper (if equipped).

- 3 flashes - deactivator switch is open or circuit defective.

- 4 flashes - vehicle speed signal is out of range or circuit is defective

4. Immediately (.25 second delay) after the static test, the speed control servo does a dynamic test by automatically actuating the throttle lever from 8 mm (0.315 in) to 12 mm (0.472 in) of travel from the idle position. During the dynamic throttle pull, observe throttle movement to witness any binding or sticking of the speed control cable and correct connection of speed control cable to throttle lever. Make sure the throttle returns to the idle position.

5. Return the ignition switch to the OFF position and proceed to the Symptom Chart.

Oct 19, 2010 | 2003 Ford F150 Regular Cab

1 Answer

This problem is on a 1998 740iL. When I press the steering wheel cruise control activator - the green indicator light comes on but when I press the "set" (+) button it does not engage and the car does not...


my BMW 740i has a problem with the cruise control.
The cruise control will work for about 20 miles and then quit working and will not work again.

May 17, 2010 | Cars & Trucks

1 Answer

2001 F-150 cruise control stopped working. Already checked the fuse and it's good. What's next


really tough to do on the net but first we need to know about any codes...

Hold speed control OFF button, and turn ignition switch to RUN position. CRUISE indicator should flash once to indicate successful entry into self-diagnostic mode. If CRUISE indicator does not flash, start procedure over. If CRUISE indicator still does not flash, repair system by symptom there might be some switch concern

If CRUISE CONTROL indicator flashes once followed by 5 additional flashes, replace speed control servo/actuator.

Release speed control OFF button. Within 5 seconds in entering self-diagnostics, press speed control ON button. Press remaining speed control buttons in the following sequence; ON, RES, COAST and SET/ACCEL.

As each button is pressed, CRUISE indicator will flash.

Wait until indicator light goes out, then press next button. After sequence has been completed, indicator light will flash to indicate test passed or failed. With the codes we can then better diagnose your concern

Immediately after static test has passed, actuator performs a dynamic test by automatically operating throttle .04-.40" (1-10 mm). Observe throttle movement to witness any sticking in cable or linkage. Ensure throttle returns properly. Turn ignition switch to LOCK position. If self-diagnostics do not pinpoint fault there is more we can do but tough over the net

Mar 26, 2010 | 2001 Ford F150 Styleside SuperCrew

3 Answers

Cruise does not work on Ford F150


Once you verify / change the Cruise Control Switch
This is the recall that hickoryy472 posted about ( you can also check on the ford site to see if it is still outstanding, it is free ).
recall 05S28. Description: Speed Control Deactivation Switch.

Another option for testing is to pull the connector on the End of the Master Cylinder, and jumper the 2 pins in the connector together. This is a secondary safety switch, in case the tail lamps go out while using the CC, that the pressure switch will shut off the CC.

Next you can run a self test on the CC :

There is a self test in the cruise control system.
With the key off depress and hold the cruise control off button while turning the ignition to the run position,don't start the truck, the cruise light will flash once to let you know it is in self test.
Five additional flashes indicate a bad cruise control servo

Release the cruise off switch and within 5 seconds depress the other switches in sequence:
1. on
2. resume
3. coast
4. set/ accel
The speed control light will flash as each switch is depressed.

If the last one does not flash it may then flash a code

After this the cruise will move the throttle to test the actuator and the cable.
Make sure the throttle returns to idle and turn the key off.
----------------------

Self-Test Diagnostics

WARNING:
This test is a key on engine off (KOEO) test only that is conducted in park only with emergency brake fully engaged.

1. Enter self-test diagnostics by depressing the speed control OFF switch while turning the ignition key ON, making sure the engine does not start and is not running. The speed control indicator on the instrument panel will flash once to indicate that speed control module entered the diagnostic mode. Five additional flashes at this point indicate a defective speed control servo. Release the OFF switch.

2. Press the remaining switches in this sequence: ON, RESUME, COAST and SET/ACCEL.

If the ON switch is not depressed within five seconds after entering the diagnostics mode, the module times out and the procedure must be started over.

The speed control indicator lamp will flash as each switch is depressed. Press each switch in the sequence immediately after the indicator light goes out for the previous switch.

Note:
There will be a slight delay when the last button is pressed and the lamp flashes.

3. A lamp flash with the last button (SET/ACCEL) indicates that the static test passed. If the lamp does not flash with the last button and there are no additional flashes of the lamp, the switch is defective.

If the lamp does not flash with the last button, and additional flashes occur, follow the chart below for trouble codes:

— 2 flashes - BPP defective, circuit is defective, brake applied, CPP switch or jumper (if equipped).

— 3 flashes - deactivator switch is open or circuit defective.

— 4 flashes - vehicle speed signal is out of range or circuit is defective

4. Immediately (.25 second delay) after the static test, the speed control servo does a dynamic test by automatically actuating the throttle lever from 8 mm (0.315 in) to 12 mm (0.472 in) of travel from the idle position. During the dynamic throttle pull, observe throttle movement to witness any binding or sticking of the speed control cable and correct connection of speed control cable to throttle lever. Make sure the throttle returns to the idle position.

5. Return the ignition switch to the OFF position and proceed to the Symptom Chart.

You don't have the stalk GM type CC switch, so clint969's post is good info, just for another manufacture.
The buttons ( if they are the problem ) can be removed from the steering wheel without pulling the steering wheel itself on a Ford.

Start with the recall, and then test the CC, and see if you have an issue still

Nov 28, 2009 | 1998 Ford F150 Regular Cab

1 Answer

'92 Town car airbag indicator flashes, cruise control not working


you need to have a diagnostic done in order to get an error code and take it from there..

Sep 05, 2009 | 1994 Lincoln Town Car

2 Answers

Cruise Control on 2 door Sport 4x4 with SOHC: Non-working cruise control. When turned on, cruise control does not engage, no dash light indication either.


look in your owner's manual for the location of the cruse control fuse it is different from other fuses usually much larger

May 21, 2009 | 1999 Ford Explorer

3 Answers

"Cruise" on a 5-speed '00 Hyundai Elantra


I have this same car. The place you set speed control is on the windshield wiper switch on the right side of the steering column. The button with the indicator light has to be pushed in order to use the cruise control but just because the indicator light is on, it does not mean the cruise is on. Hope this helps a little. If you need more info and someone else doesn't answer more eloquently.. I'll check back and try to give you more info. :-)

Apr 09, 2009 | 2000 Hyundai Elantra

1 Answer

1992 Honda Accord, cruise control will not engage


defective switch or an electrical short. please email me at meanness628@aim.com with anymore info you have

Sep 08, 2008 | 1992 Honda Accord

Not finding what you are looking for?
1997 Ford Escort Logo

428 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...