Question about 1995 GMC Jimmy

1 Answer

1995 GMC JIMMY 4DR 4W DR, 4 WHEEL DRIVE KEEPS GOING OUT

I TOOK MY JIMMY TO A MACHANIC AND HE PREPLACE THE PUSH BUTTON CONTROL ON THE DASH AND AN ADDITIONAL BOX UNDER THE DASH. WITH IN TWO WEEKS IT WENT OUT. TOOK IT BACK IN THEY SAID I HAD A BAD ACTUATOR. NOT SURE IF THAT IS WHAT ITS CALLED. A METAL BOX IN THE DASH ABOUT 5 BY 3 INCHES WIDE. THEY REPLACED AND FIXED IT FOR FREE. DROVE IT DOWN THE ROAD AND IT WENT OUT AGAIN. THE LIGHT IS ON THE 2 WHEEL BUTTON. BUT IT WILL NOT SWITCH TO 4WHEEL. THEY DON'T KNOW WHAT IS CAUSING IT TO KEEP GOING OUT. HELP $700. LATER,

RONI

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Problythe moter on the side of the transfer case, if it is not the actuator on the frount axel. Moter on the transfer case is about 500 for my 96 GMC sierra. It is a dealer part only. The metal box under the dash will hardly ever go out but every one all ways wants to replace it.

Posted on Feb 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1994 jimmy push button 4x4 wont engage


Could be the servo on the front diff not activating. Could be a power prob or failed unit.

Jan 15, 2013 | 1994 GMC Jimmy

1 Answer

1996 gmc jimmy started making noise sounding like it is is right front was told need to replace wheel hub which was done. Still making the same noise in 2 wheel drive. when you push button for 4 wheel...


Sounds like your front axle is trying to engage but does not engage fully.check your vacuum going to the t-case switch and then if that is ok check your vacuum at the front axle actuator.It is located under the battery tray.

Dec 06, 2010 | 1996 GMC Jimmy

1 Answer

I have a 1996 gmc jimmy that has a push button 4 wheel drive but my four wheel drive isnt working


it may be unplugged from button pull the case out of dash to be sure ther is a connection @ plugged in good, the little panel pulls out W/buttons @ all

Aug 12, 2010 | 1996 GMC Jimmy

1 Answer

Push button 4 wheel drive stuck in 4 wheel hi


My GMC Jimmy '01 would slip from 2-wheel to 4-wheel drive while I was driving. First time it happened my mechanic replaced a small part. This last time, he couldn't find anything wrong so he popped the 2-4 out and disconnected the 4-wheel drive. Now I don't have the problem.

Feb 22, 2010 | 2001 GMC Jimmy

1 Answer

I have a 99 GMC Jimmy with the 4 wheel drive. I


check fuse and relay to switch if power to switch retest switch new doesnt mean not defective if no power check connections and wiring for damage or breaks

Dec 02, 2009 | 1999 GMC Jimmy

2 Answers

95 jimmy 4x4 drive acting weird.


You have a short, most likely behind your dash board that is causing your four wheel drive indicator to come on the only way to find out is to start looking up and underneath your dash board.

Sep 29, 2009 | 1995 GMC Jimmy

1 Answer

1994 GMC Jimmy stuck in 4-wheel low.


Have you tried this: put it in nuetral and push on the brake! Then as your doing these things push the 2 wd button!

Dec 06, 2008 | 1998 GMC Jimmy

Not finding what you are looking for?
1995 GMC Jimmy Logo

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...