Should be in crankshaft pulley you have to take out.
SOURCE: Locate 2003 Chevy trailblazer crankshaft position
The Crankshaft position sensor is located on the left rear of the engine block below the starter. it has an oval connector and is held in place by one bolt. See picture of sensor below (some models has a 45 degree connector, most are straight like the one pictured below.
SOURCE: Where is the crankshaft position sensor located on
looking into the engine bay it is on the right side just below the fuel rail.
SOURCE: where is knock sensor located on 2004 chevy 2500Hd
Under intake manifold on top of block,you need to remove intake to access sensors there are two of them you can't miss them when intake is off. After replacing sensors you need a new intake gasket.
SOURCE: were is the crankshaft position sensor located on 2001 chevy mali
It mounts in the side of the block near the crankshaft,it fits in a hole,going into the engine block.,look on the inside of the engine compartment ,on the firewall side,left of the pulleys,down low.
SOURCE: 2002 chevy trailblazer with massive oil leak.
oil pan, or rear mainseal housings are common leaks on these... also if 4wd, diff runs thru oil pan..
1,729 views
Usually answered in minutes!
×