Question about 1997 Jeep Grand Cherokee

1 Answer

Information Center in a 1997 Jeep Gr Ch Laredo

The dispaly or information center stopped working in my Jeep- what can i look for or what are the most common issues with these that i can look to fix it?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 27 Answers

If you refer to the display that shows a diagram of the vehicle with the wheels lit. That display might have turned off due to a fuse problem. Chek the fuse. If the fuse is ok and the cabling powering the module are ok, then the module itself might be the problem. If that was the case, before thinking of purchasing a new one, disinstall the bad one, open it (8 small philips screws), replace the four capacitors it has on the back of the circuit board of the module (use soldering iron proper procedures), (each capacitor might cost 50 cents while the whole module might cost more than 100 dollars), and reassemble. That should take care of it for many years ahead.

Posted on Aug 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Door ajar light doesn't work


may be un hooked lots of people have no idea how to repair things so unhooking turs them off

Oct 01, 2013 | Jeep Cars & Trucks

1 Answer

Information center not working on 1997 jeep grand cherokee


The information center located on the overhead console gathers information from several sources. If some of those sources are not providing info then the display won't show it. When you say it is not working you need to see first if it is lit or not, or is it that some data (not all) is not showing?

Mar 07, 2010 | 1997 Jeep Grand Cherokee

3 Answers

My ac, power windows, the power locks, ALL Stopped working!!!


There is a power accessory relay under the hood or inside the fuse block/power distribution center that feeds these accessories. The relays wear out, rendering everything they feed inoperative. ChryCo often used the same part/numbered relay for several locations in the Power Distribution Center on numerous ChryCo-branded vehicles, including Jeeps.

Sep 12, 2009 | 2004 Jeep Grand Cherokee

1 Answer

Interior lights on climate clontrol knobs don't work


I have this same problem, have you found a way to fix it?

Jun 02, 2009 | 2005 Jeep Grand Cherokee

1 Answer

Vehicle information center


1997 jeep Grand Cherokee 5.2 liter V8. Water Pump. When I remove the big nut to remove the clutch fan. Will that lose the pulley that's attached to the water pump? I don't see bolts holding pulley wheel to the water pump? Is it pressed on or will it become loose when I remove clutch fan nut?

Oct 19, 2008 | 1997 Jeep Grand Cherokee

1 Answer

1994 Jeep Laredo The miles to empty is reading OC


That means ( open circuit )
That information center assy. might be bad.

Oct 13, 2008 | 1994 Jeep Cherokee

1 Answer

Service 4wd switch


I have the same problem the switch is on the transfer case! what your talking about is your vehicale information center. the stupid thing sucks I also replaced it but it only comes on some times now. dont know!

Sep 10, 2008 | 1993 Jeep Grand Cherokee

Not finding what you are looking for?
1997 Jeep Grand Cherokee Logo

Related Topics:

565 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...