Question about 2005 Nissan Frontier

1 Answer

I have a 2005 nissan frontier. My trailer hookup works for my blinkers and my brakes, but no juice for my running lights. Could this be a fuse problem and if so, where can I get a fuse box diagram?

Posted by on

  • Anonymous Mar 16, 2014

    2005 frontier cc factory tow pack sig/brake stopd wrkng fuse? where?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Your trailer hook up is not right the running lights are ran pff your headlights switch check the wiring

Posted on Mar 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have the same problem as discribed below. 2007 Nissan Frontier -- Trailer running lights stopped working. Brake lights and turn signals still work. Where is the fuse for the trailers running lights....


the fuse is inside of the IPDM the white box on r/h side of truck by the battery. there is a black cover that you have to remove to see the white IPDM box. the IPDM has fuses and relays. the tail lamp fuse is the 10amp fuse las one in the row of fuses. its by it self with no fuses next to it. check the IPDM cover on the inside. its marked.

Sep 16, 2011 | 2007 Nissan Frontier SE Crew Cab

1 Answer

I have a 2005 Frontier with factory tow package ... just had problem with right trailer turn signal not working .... dealer replaced blown fuse .... Question: In case this happens on the road, where is the...


I actually know the solution. I just went through it. It's a very long story, and I cannot tell you how mad I am at the Nissan Dealership in Grand Junction, Colorado, for not knowing the answer to this question right away. It has cost me over $500 and 500 miles of driving to learn the location of this tiny fuse holder. Look straight up above the brake pedal and accelerator pedal (under the dashboard) and see a wiring harness that plugs into the "Body control module" above the steering column. You should see two mini fuse holders sticking out of this harness. They are whitish in color, like a gallon milk bottle. One is for the right trailer turn signal, and one is for the left.
This is the only year Nissan Frontier where this is true (as far as I know) it is the result of a recall on that year where they installed this harness. If your truck went in for the recall, then you will have the same harness located in the same place. Good luck, Bob Walker, Moab, Utah

Mar 17, 2011 | 2005 Nissan Frontier

1 Answer

Parking lights on Nissan Frontier on - trailer parking not. 4 pin connector to factory connector (after market sealed wiring) - brake and turn signals work - no power to "brown" wire at factory connector...


First check the fuses. There may be one for trailer running lights. Check also power at the harness. If the brake lights and turn signals are seperate, there has to be a converter from 5 to 4 wire. For the power to feed back to the brake lights it sounds like the vehicle wiring is direct and not using a converter... or one of the bulbs on the trailer is contacting both contacts. Try http://www.etrailer.com/faq-wiring.aspx and maybe get a simple 4 pin tester that plugs into the 4 pin connecter. Hope this helps.

Oct 24, 2009 | 2005 Nissan Pathfinder

1 Answer

No running lights.


check the relays for the lights, and check the fuse again, make sure the bulbs are all good

Jul 31, 2009 | 1999 Nissan Frontier

1 Answer

2007 Frontier with trailer lights problem


Most likely it is the relay which is built into the turn switch. Turn switch will have to be replaced. It is also good idea to replace the flasher as well. Make sure both bulbs are new.

Jul 13, 2009 | 2007 Nissan Frontier SE Crew Cab

1 Answer

2005 frontier


Sounds like you blew a fuse for your running lights. Make sure the connectors are dry, find the fuse for the running lights and test it.

Jun 18, 2009 | 2005 Nissan Frontier

2 Answers

My harness for my trailer lights quit working.


If the lights are working on your vehicle, then no. With a test light, check to see if you're getting power on the plug coming from the vehicle. You should if all the lights are working on your truck. I'd check the ground wire to the plug on the trailer harness... probably loose or disconnected, especially if everything quit all of a sudden.

Jun 11, 2009 | 2005 Nissan Frontier

2 Answers

Towing lights on 2005 titan


sounds to me like the fault lies between the trailer plug on YOUR truck ( not the work truck ) and the L/R brake and signal light assy on YOUR truck. Just follow the harness from the plug. You'll find the problem. Hope this helps

Apr 03, 2009 | 2005 Nissan Titan

1 Answer

2007 Nissian Frontier trailer lights


There should be a 30 AMP mini blade fuse in the fuse box under the hood that you are probably missing. I assume that since you got the relays with the wiring kit, that you got the kit from a Nissan dealer. If that is true, there should be a fuse in the kit also- in a sealed bag that has the "trailer wiring harness owner's manual" in it.


Hope this is helpful!


Nissan Scope Technician- 10+ years experience in Nissan dealership.

Oct 24, 2008 | 2007 Nissan Frontier SE Crew Cab

Not finding what you are looking for?
2005 Nissan Frontier Logo

690 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...