Question about 2007 Chevrolet Malibu SS Sedan New Cars

Open Question

2007 malibu display panel and radio will not work after power loss

Posted by on

  • nitersa Apr 06, 2009

    radio fuse need to be replace under the hood

×

3 Suggested Answers

rockitman187
  • 2559 Answers

SOURCE: Words power steering on display panel. Not feeling anything wrong. What could the problem be?

Low fluid level in the power steering pump reservoir.

Posted on May 07, 2009

  • 134 Answers

SOURCE: NEED 2007 CHEVY MALIBU RADIO CODE

I just got the code for my radio by calling 1-800-537-5140 and choosing the option for my vehicle make. 1 for chevrolet. then i entered 106010 for the customer # and then entered my serial # from the stereo and it gave me a lock code for free. Now i am just trying to figure out how to enter it since my manual tells me to take it to the dealership. Now that you have your 4 to 6 digit code, you can enter it by following the these steps. 1. Make sure your ignition is in the "on" position, but no started. 2. Press/Hold the "HR" button to set the first 2 or 3 numbers. 3. Press/Hold the "Min" button to set the next 2/3 numbers. 4. Press the AM/FM button one time. "SEC" should be displayed. You can now turn the radio on. Good luck!

Posted on Oct 28, 2009

  • 312 Answers

SOURCE: the radio for my 2007 chevy malibu is locked

if you hold the 1 and 4 presets and you get 3 lines like this - - - then that meens there is no code stored so the problem is not in your theftlock but the radio or power to it.

Posted on Dec 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace the bulbs in the radio display panel on my 2007 Peugeot Partner Van


you need two brackets .i made a pic .these are normal included,
in your manuel off the radio.puch them in the holes till you feel,
little resistants.then puch bolt sideways and the radio comes out.
am not sure if the bulbs are replaceble. 5a9905e7-8a87-4088-9e2c-7630794e0aa8.jpg

Mar 04, 2014 | 2007 Peugeot Partner HDi

2 Answers

The radio for my 2007 chevy malibu is locked


if you hold the 1 and 4 presets and you get 3 lines like this - - - then that meens there is no code stored so the problem is not in your theftlock but the radio or power to it.

Dec 27, 2009 | 2007 Chevrolet Malibu SS Sedan New Cars

1 Answer

Malibu 2001 radio locked


hi friend,
If you have the security code it's easy. The code is something that either you or a previous owner entered. If you don't have the security code a trip to the dealer will be in your future.
Unlocking the Theft-Deterrent Feature After a Power Loss
Enter the code as follows; pause no more than 15 seconds between steps.
  1. Turn ON the ignition. LOC will appear on the display.
  2. Press MN and 000 will appear on the display.
  3. Press MN again to make the last two digits agree with your code.
  4. Press HR to make the first one or two digits agree with your code.
  5. Press AM-FM after you have confirmed that the code matches the secret code you have written down. The display will show SEC, indicating the radio is now operable and secure.
Entering the incorrect code eight times will cause INOP to appear on the display. Wait an hour with the ignition in the ON position before you try again. When you try again, you will have three more chances (eight tries per chance) to enter the correct code before INOP appears.
Deactivating the Theft-Deterrent Feature Enter the code as follows; pause no more than 15 seconds between steps.
  1. Turn the ignition to ACC or ON.
  2. Turn OFF the radio.
  3. Press the 1 and 4 buttons together. Hold them down until SEC shows on the display.
  4. Press MN and 000 will appear on the display.
  5. Press MN again to make the last two digits agree with your code.
  6. Press HR to make the first one or two digits agree with your code.
  7. Press AM-FM after you have confirmed that the code matches the secret code you have written down. The display will show -- -- --, indicating that the radio is no longer secured.
Entering the incorrect code will cause SEC to appear on the display. The radio will remain secured until the correct code is entered. When battery power is removed and later applied to a secured radio, the radio will not turn on and LOC appears on the display. To unlock a secured radio, refer to "Unlocking the Theft-Deterrent Feature After a Power Loss".

hope this helps u
please rate me..............
thank u for using fixya
regards
sivvaranjini

Nov 26, 2009 | 2001 Chevrolet Malibu

1 Answer

NEED 2007 CHEVY MALIBU RADIO CODE


I just got the code for my radio by calling 1-800-537-5140 and choosing the option for my vehicle make. 1 for chevrolet. then i entered 106010 for the customer # and then entered my serial # from the stereo and it gave me a lock code for free. Now i am just trying to figure out how to enter it since my manual tells me to take it to the dealership. Now that you have your 4 to 6 digit code, you can enter it by following the these steps. 1. Make sure your ignition is in the "on" position, but no started. 2. Press/Hold the "HR" button to set the first 2 or 3 numbers. 3. Press/Hold the "Min" button to set the next 2/3 numbers. 4. Press the AM/FM button one time. "SEC" should be displayed. You can now turn the radio on. Good luck!

Oct 28, 2009 | 2007 Chevrolet Malibu SS Sedan New Cars

1 Answer

INSTRUCTIONS ON REMOVAL OF STOCK STEREO


1. REMOVE THE NARROW TRIM PIECES TO THE RIGHT AND LEFT OF THE RADIO TRIM PANEL.

2.REMOVE THE GLOVE BOX.

3. REMOVE THE KNEE BOLSTER UNDER THE STEERING COLUMN.

4. REMOVE THE I/P CENTER TRIM PANEL. LOOK FOR THE SCREWS ON THE LOWER EDGES OF THE TRIM PANEL. DISCONNECT THE HAZARD SWITCH.

5. REMOVE THE HVAC CONTROL MODULE.

6. REMOVE THE RADIO.

IF YOU ARE REPLACING A STOCK RADIO WITH ANOTHER STOCK RADIO IT MAY HAVE TO BE PROGRAMMED BEFORE IT WILL WORK.

IF THIS HELPED YOU PLEASE RATE ME.

Jul 04, 2009 | 2007 Chevrolet Malibu SS Sedan New Cars

2 Answers

Stuck CD in the multi CD player of 2004 Chevy Malibu Maxx


The only thing that is left for you to do is to remove the stereo and then disassemble it and remove it yourself. A little daunting but needs to be done. Sounds like it went in wrong and then became jammed

Jun 10, 2009 | 2004 Chevrolet Malibu

1 Answer

2005 Malibu radio display off and on


the display screen probably overheated since its under warranty take it back and tell them to fix it

Nov 13, 2008 | 2005 Chevrolet Malibu

1 Answer

Radio not working


Pull the radio and check the wiring for power ground etc, if all is ok then you will need to send the radio out to an authorized repair shop.

Oct 07, 2008 | 2005 Chevrolet Malibu

1 Answer

Removing the radio of 07 malibu


On their web-site, mechanic shop, here in Fixya's site, google etc...
and you can also take it to mechanic... oh, and if you replace it, replace to sony's mp3 player with drawing usb panel.

Jun 21, 2008 | 2007 Chevrolet Malibu SS Sedan New Cars

Not finding what you are looking for?
2007 Chevrolet Malibu SS Sedan New Cars Logo

Related Topics:

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63572 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...