- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Well, Lets see, When the Left Blinker front is not working does the bulb turn on BUT, Just doesn't blink. If it turns on and no blink You need to also, check the rear bulb.If eight er one is bad they will NOT blink. The turn indicator on the dash does that blink.. If you find all the bulbs are GOOD
Then, I recommend take out the Front bulb and look into the socket be sure it's clean no rust.
Also, be sure you put the proper bulb in. I know the 1156 bulb looks the same as the 1157.
Be sure, you installed the right part number Let me know.
If you mean the blinker bulb, they are either set in behind the front bumper, where you see the orange/white colored glass (directly beneath the headlights)....OR the side blinkers, which are accessed by opening the hood and reaching in from the inside.
The rear blinkers are able to be accessed by opening the hood, and removing a small (phillips head) screw on the top of the vertical tail light housing. These lights serve as blinkers and brake lights, and there are two in each housing. Hope that helps! :)
RIGHT BLINKER dead ,front,back, or both..???? If front works, and rear doesn"t (REPLACE REAR BULB).....and vice a versa....If rear and front both don't work replace the FLASHER ..Flasher is located in the FUSE block area.......Listen to the operation of the LEFT or RIGHT flasher operation and you should notice a dirrerence....