Question about 2006 Honda CR-V

1 Answer

Honda crv 2000 computer reset

I own a honda crv 2000, recently pulled out the fuse for the srs airbags, now replaced but the srs light stays on which means airbags are not functional, i understand i need a computer reset but can I do that or do i neet to take it to honda dealer?????? if a auto electrician does that will he stuff up computer settings (idle speed ect...) and not be able to fix

Posted by on

  • Joely69 Feb 19, 2009

    hey, thanx for the reply, found the data connector, no probs. what does i do now.

  • anthony skidmore May 11, 2010

    You can erase faults from the ecu without a tester, but you need to find the data connector, its usualy a yellow connector. It will be either a 2 pin or a 3/5 pin . It can be in 1 of 3 locations. Under the dash, under the center console to the front on the drivers side or under the passenger side of the dash.

    Once you find it , let me know and i will tell you how to clear the codes and lamp.

    Or take it to the local Honda dealer, he will plug in the tester and rest it, which is a lot quicker. He will not mess up the rest of the settings of the ECU.

    Hope this helps

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 275 Answers

Ok,
1. ensure ignition off
2 . bridge the 2 pin connector, Put a piece of wire across both terminals
3.switch ignition on
4. SRS lamp should illuminate for 6 seconds
5.disconnect the bridge wire within 4 seconds of the warning lamp extinguishing
6.SRS lamp should illuminate 2 times, Codes erased
7.switch ignition off
8 Wait 10 seconds. switch ignition on and check SRS warning lamp operation.
hope this helps

Posted on Feb 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fix airbag warning light which stays on


Airbag Service Reset Tools

Find the fuse panel cover in the foot well on the driver's side of the vehicle. Pull down on it to open it.
Find a yellow connector inside the fuse panel. Pull out this connector. This is the airbag power connector, also called the SRS power connector.
Insert one end of the paperclip into one terminal of the SRS power connector and insert the other end of the paperclip into the other terminal.
Put the key into the ignition and turn on the vehicle, making sure you don't start the engine. The paperclip shorts out the SRS light, thus resetting and turning it off. Plug the SRS power connector back into the fuse panel. Put the cover back on the fuse panel and shut off the vehicle.
Wait a couple of minutes, then turn the engine on. Look on the instrument panel to ensure that the SRS light has turned off. Turn off the engine and remove the keys from the vehicle.

Oct 10, 2014 | Cars & Trucks

1 Answer

Reset SRS indicator light


Unfortunately, the only way you can clear codes on a post 1996 car is to have a scanner. You can either get the error cleared at a local shop where most of the time they will do it for free. If not, you should be able to buy a hand scanner from a local parts store like NAPA. Unfortunately, the latter solution is pricey.

Jul 22, 2008 | 2002 Honda CR-V

3 Answers

How do you reset a 2005 Honda CRV airbag light?


with a SCANNER.
your mechanic or Honda Dealer will provide this service....
Disconnecting the battery won`t do you any good.
You will have to fix the air-bag problem first before you can erase the airbag light...

Mar 02, 2011 | 2005 Honda CR-V

2 Answers

What is the dash light srs, in a honda accord 2002 vtec engine 3.0


The SRS, or supplemental restraint system, on your Hondamag-glass_10x10.gif Accord 2002,


Read more: How to Reset a Honda Accord SRS Light | eHow.com http://www.ehow.com/how_6403892_reset-honda-accord-srs-light.html#ixzz0tQdveFZn
responsible for deploying the airbag in the event of an accident. If this system is malfunctioning, the airbag may not deploy properly during an accident. However, the system does warn you of a system malfunction. The yellow "SRS" light on the dash will light up, indicating a problem with the system. Once you've fixed the problem, you need to know how to reset the SRS light on your Accord

Read more: How to Reset a Honda Accord SRS Light | eHow.com http://www.ehow.com/how_6403892_reset-honda-accord-srs-light.html#ixzz0tQdgZ0ic

Jul 12, 2010 | 2002 Honda Accord

1 Answer

2005 honda crv airbag module location


Most of the time it's in the middle of the car under the center consol(consol with stereo) , SRS module usually mounted on the floor.

May 27, 2010 | 2005 Honda CR-V

2 Answers

Srs light stays on on my Honda civic


The most likely possibility is the connector for the airbag is not on securely. Check the connector first. But if the connector is connected properly then you will have to get the error codes to locate the exact problem for SRS light ON.
There is a way to pull the codes from the SRS control unit without a scan tool.
1. Turn the ignition switch OFF , and wait for ten seconds. Then connect the SCS service connector to the service check connector (2P). If you do not wait ten seconds, the SRS unit will not be completely reset and will not output DTCs.
2. Turn the ignition switch ON (II). The SRS indicator light comes on for about six seconds and goes off. Then it will indicate the DTC:
· The DTC consists of a main code and a sub-code.
· Including the most recent problem, up to three different malfunctions can be indicated.
· In case of a continuous failure, the DTC will be indicated repeatedly.
· In case of an intermittent failure, the SRS indicator light will indicate the DTC one time, and then it will stay on.
· If both a continuous and an intermittent failure occur, both DTCs will be indicated as continuous failures.
· In case the system is normal (no DTC), the SRS indicator light will stay on.
3. Read the DTC.
4. Turn the ignition switch OFF, and wait for ten seconds. Then disconnect the SCS service connector from the service check connector (2P).
The SCS Service Tool is nothing more than a jumper wire.
Thanks. you can rate this solution and show your appreciation.

May 19, 2010 | 2000 Honda Civic

1 Answer

SRS dash light has come on and stays on , honda odyssey 2000 model, hope someone can help me !! Cheers Emma


SRS stands for supplemental restraint system (airbags). Have your car hooked up to a diagnostic computer at a dealer or good repair shop. They will tell you if your problem is with the warning system or the restraint system itself. Do not ignore this warning. And good luck with it.

Jun 15, 2009 | 2000 Honda Odyssey

2 Answers

96 honda accord airbag module......


does the srs light come on and go off at random times and sometimes stay on if that is so check the srs switch under your seat it try moving round in the seat applying weight in diff locations and see if it goes off and on if so then you might need to replace that switch

Mar 05, 2009 | 1999 Honda Accord

1 Answer

The SRS light on my 2000 Honda accord went on, what does it mean.


The SRS (Supplemental Restraint System) means that something in you airbag or seatbelt sensor has triggered the error. The system will not accidentally deflate the airbags but may not go off if in the case of an accident. Although some people say you can reset the system by jumping wires or something in the fuse box, *Do Not Do This*. This will and can damage the setup program in the computer, making it impossible to repair, and could damage the system entirely. Take it to the dealer to reset the system.

Aug 10, 2008 | 1995 Honda Accord

Not finding what you are looking for?
2006 Honda CR-V Logo

2,039 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...