Question about 1991 Honda CRX

1 Answer

1991 CRX rear disc conversion

I am trying to put 1991 crx si rear disc brakes on my 1991 crx dx...i am deployed overseas and trying to order the parts so i can work on it when i get home i need to know what parts i need and if it it as simple as taking off the drums and putting on the discs thank you

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 100 Answers

You would have to check the axle is the same

Posted on Feb 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the firing order for a 1991 crx si


the firing order for your 91 crx should be 1, 3, 4 and 2. You need to identify where the rotor points to when cylinder 1 is at top dead center.
Cylinder number 1 is the one closest to the accessory belts (alternator, power steering , etc, hope this helps.

Aug 10, 2014 | 1991 Honda CRX

1 Answer

What is the firing order for a 1991 crx si


All Honda 4 cylinder engines that I have worked on have a firing order of 1342. That is the firing order on your CRX. #1 is the cylinder closest to the timing belt.

Aug 10, 2014 | 1991 Honda CRX

1 Answer

I have a 91 honda crx dx model..i was sriving down the freeway and the engine stopped..i had full power lights and all and the car wouldnt start again for about 10 minutes then it finally started


Main relay has dry joints. Remove it, from under the coin tray in between door and steering wheel under dash. Resolder the join and refit. You don't need a new one, just the joints are dry.

Very common and gives you the willies when it kills you car on the freeway.

Vote for me if this helps you.

May 20, 2010 | 1991 Honda CRX

1 Answer

HOW DO I INSTALL GLOW GUAGES ON MY 1991 HONDA CRX SI


you'll need to take the gauge cluster out and disassemble it. then take off the pointers making sure to note where they're pointing to. then apply the new face. and wire power and ground. put the pointers back on and reassemble.

Feb 12, 2010 | 1991 Honda CRX

1 Answer

1991 honda crx si m/t almost impossible to shift after it warms u


Have you adjusted the clutch cable enough to allow it to disengage the clutch ? try that first. Is this the original clutch?

Jun 11, 2009 | 1990 Honda CRX

2 Answers

Idles good but,above 1300 rpm serges evenly at about 3800 no more serge 1990 crx 16 valve 1.6 very strong serge


Have you replaced the fuel filter? if not, it could very well be the problem

Oct 14, 2008 | 1991 Honda CRX

Not finding what you are looking for?
1991 Honda CRX Logo

Related Topics:

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6879 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...