Question about 1988 Mazda B2600 Cab Plus

1 Answer

Can any one please help me with the size of the plug and point gaps on a mazda B2600

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mazda Master
  • 21,949 Answers

Spark plugs 25th points 20th ,check for wear on the drive arm of the distributor ,the square that opens the points .check dwell if you find a dwell meter should be about 50% .check that the drive cam for opening the points isnt worn either ,and most important dont forget a bit of grease on the cam as well .lift rotor arm off and a drip of oil on top of the little sponge .timing could be between 8 to 12 degrees but with the unleaded fuel 95 then about 6 degrees to stop it pinking 8 degrees with 98 unleaded ,thisa engine doesnt need a lead aditive as it was built with stellite coated valves and seats

Posted on Feb 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Mazda B2600 1990 model I am kindly asking for the ignition points gap


Hi yes common air gap on contact points will be 0.45/0.50/0.55/. do check if distributor rotor shaft not worn, motor can be set 10 degrees (BTDC.

Jan 07, 2015 | Mazda Cars & Trucks

1 Answer

Mazda bravo vibration on gears


as the only unit operating when stationary is the engine it points to a problem in that area. assuming that nothing has been done to the gearbox /fly wheel area it points to a faulty firing system ie spark plug or lead or shorting of the lead from dirt or grease. this misfiring equates to an unbalanced engine or vibration

Jan 04, 2013 | 1988 Mazda B2600 Cab Plus

1 Answer

Are mazda B2600 gearbox same to Mitsobishi. Can I replace Mitsobishi gearbox on Mazda B2600..1992?


Mazda and Ford parts will change,your B2600 with swap out with a 92 Ford Ranger.

Dec 25, 2012 | 1992 Mazda B-Series

1 Answer

The engine in my mazda b2600 1994 sometimes makes short cut offs in seconds time.i cant find the reason,please help me


comon proble is ignition switch. try moveing key slightly towards off. if vehicle dies, that could be your problem.

Dec 15, 2012 | 1988 Mazda B2600 Cab Plus

2 Answers

Spark plug gap for mazda rx 8


Standard plug gap = 1.15-1.25 mm {0.046-0.049 in}

Nov 09, 2010 | Mazda RX-8 Cars & Trucks

2 Answers

Changing gearbox oil ?


i accidently drained some of the gearbox oil from my bravo b2600 1997. where is the hole to put more fluid back in there? how much should i put? and what fluid should i use?

Dec 26, 2009 | 1999 Mazda B-Series

1 Answer

Spark plug wire diagram for 88 mazda b2600 help please


I've 2 diagrams for you. In both, the distributor rotation is clockwise.

2.2L
a01c288.gif





2.6L
57088f5.gif

Nov 07, 2009 | Mazda B2600 Cars & Trucks

1 Answer

How do I hook up the wires on Mazda B2600 to plug into a 4 wire flat plug on a trailer?


you can buy an adapter at Wal-Mart for the factory plug to the square one

Oct 06, 2009 | 1988 Mazda B2600 Cab Plus

2 Answers

What size is the spark plug gap on a Mazda MX3 V6 1840cc please?


1.0 - 1.1 mm ( 0.040 - 0.043 inch )

NGK BKR5E - 11
NIPPON DENSO-- K16PR-U11

Jul 21, 2009 | 1995 Mazda MX-3

Not finding what you are looking for?
Cars & Trucks Logo

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...