Question about 1993 Ford F250

3 Answers

No restart 1993 f250 2 wheel drive 300 6cl. standard trans. will run fine then when you shut it off and go to restart it after a short time it sometimes wont start till you wait a wile could be 15min. or 60 min. Or if you spray starting fluid into it then it will start. every time this happins at home we go hook up the fuel presure gauge and it starts so we can never get it to stay acting up long enough to check a few things. at first we thought spark because we had fuel at the rail but have replaced coil, pick up coil, control modgual, plugs and cap and rotor and plug wires. then just for fun i sprayed starter fluid and it started up fine. so now what? thanks, al

Posted by on

  • 2 more comments 
  • truetrim Feb 18, 2009

    yes it has n newer fuel filter and we took a pressure reading and it was in specks but cant get a reading when it acts up because every time we've tried it starts. thanks al

  • truetrim Feb 18, 2009

    pump is 2 years old and the pressure test we've done is in specks but when it acts up and we hook up tester it starts. it has a newer fuel filter maybe 4 months old and we tried a relay this fall and it still acts up. thanks al

  • truetrim Feb 18, 2009

    if thats the case would the vac hose be wet from the fuel pressure regulator when you pull the vac line off? because its not. thanks al

  • Mike Butler
    Mike Butler May 11, 2010

    You have tried a new fuel filter right? Do you hook up fuel pressure gauge and only turn key to on (not start) position, and take reading then?

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 6,674 Answers

Pull a couple of spark plugs when this happens & see if there wet, as in fuel. Maybe injector leakage, causing flooding condition. When engine cold, it won't occur due to added fuel needed for cold start.

Posted on Feb 18, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Fuel pump is weak. loosing prime. either your fuel filter is plugged up or fuel pump relay is getting hot and won't let your fuel pump work. replace the filter first

Posted on Feb 18, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 547 Answers

Change fuel filter if you have then change fuel pump

Posted on Feb 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 96 silverado 1500 gas 4.3 v6 vortec with a 5 SPD standard trans. NV 3500 built by muncie. 2 wheel drive I need to know if their any trans. that will change out with the NV 3500 ? Standard 5spd of...


I don't know. But I do know that any well run auto parts yard has interchange books for exactly this kind of question. Basically, any standard transmission can be made to work if you are willing to spend enough time and money. It is usually best and cheapest to stay with the factory trans.

Apr 29, 2010 | 1996 Chevrolet K1500

1 Answer

Auto trans car chokes down and engine shuts off when in gear


the torque convertor is locking up,There is a plastic wire harness on top the transmission,Unplug it from the transmission and your troubles will cease,
If you want it repaired and transmission shop can do it,or you can drive it for ever unplugged

Jan 26, 2010 | 1993 Oldsmobile Cutlass Ciera

1 Answer

1993 4l60e - Shifts hard on the 1-2 shift, works fine otherwise.


Did you change the transmission filter and gasket as well as the transmission oil before running your truck.

Sep 28, 2009 | 1994 Chevrolet C1500

1 Answer

Transmission slipping


there are several solonoids inside this transmission .. did he replace all them ? if not I would suggest he do it .. These are problem starters.. they should always be replaced during a rebuild.. thanks jerry

Apr 26, 2009 | 1996 GMC Suburban

1 Answer

Engine shuts off going down the road


We had a similar problem and it was the connector that connects the ignition module (bottom of coil packs to the wiring harness. The technician spread the socket connectors and it solved the issue.

Mar 17, 2009 | 1993 Oldsmobile Cutlass Supreme

1 Answer

1993 Grand Cherokee AW4 transmission issue


have you tried a rolling shift? leave trans in drive and try moving 4x4 lever. it works on mine!

Mar 14, 2009 | 1993 Jeep Grand Cherokee

1 Answer

V6 engine idles rough after restarting, then smooths out


My first guess would be a dirty carb/fuel injector set. Run some fuel cleaner through the tank and see if it gets better. You might have to do it through a couple of tanksful. How long since you've had a tune-up? It might just be that time.

Nov 15, 2008 | 1993 Toyota Pickup

Not finding what you are looking for?
1993 Ford F250 Logo

263 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...