Question about 1999 Chevrolet Silverado 1500

1 Answer

O2 sensor and centerlink 1996 chevy 1500 conversion

Posted by on

  • leeteelowthe Feb 18, 2009

    yes i need to know how to repair center link in a 1996 chevy conversion van and should i fix 1st before i get wheels alligned



  • Mike Butler
    Mike Butler May 11, 2010

    And the question is? o2 sensor (oxygen sensor) need changing? Center Link, i assume you mean as in steering?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 6,674 Answers

Yes before alignment replace center link. Not real hard to do, just remove cotter pins & nuts. check same length etc, before disassembly. In all honesty, if you check with place doing alignment, they 'd probably charge you no more than about $10-$20 to do it for you, if not free.

Posted on Feb 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Stalling at idle or slow speed mostly


What is stalling? year/make/model?

Jul 12, 2015 | Cars & Trucks

1 Answer

How to change BANK 1 & 2 o2 sensors 1 & 2 on 1996 chevy silverado


SORRY I DONT HAVE A PICTURE BUT BANK 1 & BANK 2 SENSOR 1 REFER TO THE LEFT AND RIGHT SENSORS BEFORE THE CAT CONVERTER ( UPSTREAM) SENSOR 2 REFERS TO THE SENSOR AFTER THE CAT (DOWNSTREAM) YOU TUBE HAS GOOD VIDEOS

Jan 20, 2015 | Cars & Trucks

1 Answer

I have a 96 Chevy 1500 5.0 bogs down under acceleration


may be you should make a diagnostic and you can do it in a garage or you can do it by yourself if you want to do it by yourself you need some tools and you can find some good ones here: spobd2.com

Mar 21, 2013 | 1996 Chevrolet C1500

1 Answer

I have a 1996 chevy express conversion van 5.7 liter I have misfire in all cylinder after the truck is warmed up I have new plugs cap rotor wires new o2 sensor. o2 sensor has been changed 3 times in 3...


No, the catalytic convertor does NOT sound right.
Normally with a random misfire a tune up takes care of it. What has also caused a misfire on those early motors is the popet injectors. They were prone to having problems and have been updated back around 2000 or so. But usually its a cyclinder or two or three or... misfire. All popets going bad is unlikely.
Might try changing the fuel filter and maybe checking pressure. Just the key on pressure should be 60-66psi. While running it may be around 60 and a snap of the throttle will make it rise to 65 or so.

Oct 27, 2011 | 1996 Chevrolet Express

1 Answer

Where is the location of the bank one sensor one o2 sensor on my 2003 chevy suburban


bank 1 on a chevy is on the drivers side youll have 4 O2 sensors sensor 1 bank 1 is on the engine side of the cat converter sensor 2 bank 1 is after the cat converter (drivers side )
bank 2 is on the passenger side sensor 1 is pre cat sensor 2 is post cat converter

Mar 18, 2010 | 2003 Chevrolet Suburban 1500

1 Answer

Replacing upstream O2 sensors on 2002 chevy silverado 1500


follow the pipes from the cat forward, you shld be able to find them. from the cat down or back, would be your rear sensors.

Aug 26, 2009 | 2003 Chevrolet Silverado 1500

1 Answer

Location of O2 Sensors on 1996 Dodge Ram 1500 ?


Follow your exhaust manifold down from engine to exhaust pipes etc, you should see them sticking out, 3"-4" approx.length, with wires coming from them. Some are right on manifold, some further down on exhaust pipes.

Apr 15, 2009 | 1996 Dodge Ram 1500 Club Cab

3 Answers

1996 Chevy Express 1500 w/5.0 bogging only when warm.


The cylinder 7 misfire is likely a symptom of the problem, not the problem itself.

Typically, the catalytic converter has an oxygen sensor in front and behind it. When the vehicle is warm and running in closed loop mode, the upstream oxygen sensor waveform reading should fluctuate. The downstream 02 sensor reading should be fairly steady. Typically the P0420 code triggers the check engine light if the readings of the two sensors are similar. This is indicative of (among other things - such as faulty sensors in the "emissions loop") a converter that is not working as efficiently as it should be.

I do not believe that it is a problem with a valve/head gasket or cam.

Jan 13, 2009 | 1996 Chevrolet G10

Not finding what you are looking for?
1999 Chevrolet Silverado 1500 Logo

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...