Question about 1994 Dodge Ram

1 Answer

I have a 95 dodge 1500 with a 360 runs great but stalls when slowing down or accelerating lightly ive changed the tpi, map ,plugs n wires and exaust but problem still exist anyone have a suggestion

Posted by on

  • lounsberryjr Feb 18, 2009

    thank you i will try that this morning and let you know

  • lounsberryjr Feb 19, 2009

    thank you an hour or so w a toothbrush and carb cleaner and it worked iac was pitted up pretty bad so replacment was needed but she runs again thanks

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 6,674 Answers

I'd try pulling IAC (idle air control motor) off & cleaning the tip & shaft with a spray can of throttle body cleaner. Also sparay inside port (hole) that it was removed from. Careful with thin "O" ring usually at base where it mounts to side of throttle body. Usually a good cleaning will work, if nothing else temporarily, to confirm that's the trouble, if does cure & starts again, replace it.

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c15280070d5c

Posted on Feb 18, 2009

  • Mike Butler
    Mike Butler Feb 19, 2009

    Thanks for reply & rating, glad to help.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1995 GMC Keep stalling Randomly


starter bendix sticking maybe

Mar 31, 2013 | 1995 GMC Sierra

1 Answer

After filling 06 300c with fuel it stalls repeatedly then runs ok


Check the charcoal canister vent or filler tube vent to see if it.s plugged

Sep 09, 2009 | 2006 Chrysler 300

3 Answers

96 Dodge Intrepid ES, engine stalls


Find your firewall electrical junction block (where all the wires enter the cabin on the passenger side) and with a zip tie pull up the wire bundle so it does not ride on the upper tie rods and, fasten the zip tie to anything that is solid in the engine compartment and, let me know what happens

Jun 01, 2009 | 1996 Dodge Intrepid

2 Answers

Car acts like its sliping or miss fireing when driving


Is the eng, light on, if so use the found codes as a basis. check the fuel system for low fuel pump pressure, clogged fuel filter. If its fine check the exhaust back pressure. Before the cat. pull the O2 sensor
out and install a low pressure gauge to see there is excessive back pressure. more then 5 to 10 PSI would indicate an issue with the CAT.

Apr 24, 2009 | 1998 Pontiac Grand Prix

4 Answers

89 olds cutlass ciera bogging down when accelerating.


Working on Mom's car for three days now I've just about pulled all my hair out ! The dam thing would bog as i tried to accelerate over 700 RPM. We replaced the MAP,TPS,FUELPUMP,and i ohm-ed out everything under the hood, and then i found it!! The CRANK POSITION SENSOR had cracks around the base of the sensor and had oil seeping out.Check out pic.I hope this could be of some help...81f987d.jpg

Feb 21, 2009 | 1989 Oldsmobile Cutlass Ciera

1 Answer

Initially starts fine, runs fine, then stalls at the first stop.


This is a fuel pump issue. i would replace it and the lines as well.also, a minor tune up wouldn't hurt as well. wires plugs distributor cap points etc...

Feb 11, 2009 | 1992 Dodge Dakota

1 Answer

95 Ciera Hesitates & stalls when warm


Change the IAC the idle air control. You may be able to clean it and put it back on.

Jan 07, 2009 | 1995 Oldsmobile Cutlass Ciera

3 Answers

Engine stalls when slowing down


I'm had a similar problem with my Caravan this past October. Ask your mechanic to check the fuel pump and oxygen sensor. There was a recall on Airtex fuel pumps in 24,000 2000 Caravans in 2006, so might want to see if it was one of the affected pumps and it can be replaced for free. Good luck!

Nov 25, 2008 | 2000 Dodge Caravan

1 Answer

Codes say O2 problems even after both have been changed


The code says there is a problem, it does not say where in the circuit the problem is, it could be the wiring to the sensors, it could be the PCM (powertrain control module) in your case it sounds like an intake manifold vacuum leak.

Oct 23, 2008 | 1995 Dodge Stratus

Not finding what you are looking for?
1994 Dodge Ram Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21986 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...