Question about 2001 Chevrolet Silverado 1500
To reset the light, turn the key to the Run position. Fully push and release the accelerator pedal 3 times within 5 seconds. If the Change Oil Soon light flashes 2 times, the system is reset. However, if the light comes on and stays on for 5 seconds, the system did not reset. Repeat the procedure if the system does not reset. If it does not work using the accelerator pedal, go under the hood and move the linkage manually to reset the system
Posted on Feb 18, 2009
This is really easy! Please follow these directions:
Turn the key ON
Look at the odometer, and verify that it displays "ODO" and the total mileage traveled. If it is on "Trip A" or "Trip B", press the black stick next to the odometer to read "ODO", and the total miles traveled.
Turn the key OFF.
Press in, and HOLD the black trip meter reset button, hold it in.
DO not release it.
Turn the key ON; do NOT start the engine
Observe the Odometer display. The total mileage traveled will disappear, and you will see 5 dashes, then 4, then 3, then 2, then 1 dash, and finally, 5 zeros. Then, the total mileage traveled will redisplay.
Release the black trip meter reset stick.
This completes the reset procedure, and the light will be back on in 5,000 miles, to remind you of you next oil change.
Hope this helps, and thanks for choosing FixYa. Happy Thnkasgiving!
Posted on Nov 25, 2008
look in the manual......turn the ignition to the on position not starting it of course and then pump the gas petal 5 times then the light will blink a few times turn off then back on...problem solved
Posted on Mar 09, 2010
Tips for a great answer:
Sep 20, 2012 | 1999 Ford Taurus
Apr 12, 2011 | 2002 Chevrolet Monte Carlo
Aug 09, 2010 | 2006 BMW 750Li
Jun 20, 2010 | 2001 Pontiac Grand Am SE
Mar 08, 2010 | 1991 Buick Park Avenue
Feb 24, 2010 | 2006 BMW 3 Series
Nov 11, 2009 | 2001 Pontiac Grand Am SE
Jul 10, 2009 | 2006 Isuzu Ascender
Jan 13, 2009 | 2006 Chevrolet Colorado
518 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: